KiCAD
Tert2
KiCAD data
Components (32)
| Reference | Value | Description |
|---|---|---|
| IC2,IC3 | JT8P-3.2T-B10K-1-16Y | Stick Controller |
| IC4 | TC7W74FU | One-Gate Logic(L-MOS), D-Type Flip-Flop, SOT-505(SM8) |
| Q1 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | ESP32-C3-WROOM-02 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| U2 | ATtiny1604-SS | 20MHz, 16kB Flash, 1kB SRAM, 256B EEPROM, SOIC-14 |
| U3 | CH340E | USB serial converter, UART, MSOP-10 |
| U7 | TPS56124x | |
| U8 | BQ25172 | |
| U9 | TPS613222ADBV | 1.8A Step-Up Converter, 5V Output Voltage, 0.9-5.5V Input Voltage, SOT-23-5 |
| C3-C6 | 1u | Unpolarized capacitor, small symbol |
| C7 | 10u | Unpolarized capacitor, small symbol |
| C8,C10,L2 | 4u7 | Inductor, small symbol,Unpolarized capacitor, small symbol |
| C9 | 0u1 | Unpolarized capacitor, small symbol |
| C11,C12 | 22u | Unpolarized capacitor, small symbol |
| D1 | WS2812B | RGB LED with integrated controller |
| D2,D3 | CUHS20S30 | Schottky diode |
| D5 | STAT | Light emitting diode, small symbol |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J3 | NiMh*2 | Generic connector, single row, 01x02, script generated |
| JP1 | CHG | Jumper, 2-pole, open |
| JP2 | SW | Jumper, 2-pole, open |
| L1 | 2u2 | Inductor, small symbol |
| R1,R2 | 4.7k | Resistor, small symbol |
| R3,R6,R7,R12,R14,R15,R17 | 10k | Resistor, small symbol |
| R4 | 100k | Resistor, small symbol |
| R8 | 4k7 | Resistor, small symbol |
| R9 | 470R | Resistor, small symbol |
| R10,R11 | 56k | Resistor, small symbol |
| S1,S2 | TMHU27 | Lever and push operation type switch tact switch |
| SW1,SW2 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |
| SW4 | POW | Switch, single pole double throw |