KiCAD
Tert2
KiCAD data
Components (18)
| Reference | Value | Description |
|---|---|---|
| IC1 | RT9080N-08GJ5 | LDO Voltage Regulators 2 A IQ, 600mA Low-Dropout Linear Regulator |
| IC2 | TC7W74FU | One-Gate Logic(L-MOS), D-Type Flip-Flop, SOT-505(SM8) |
| Q1,Q2 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | TS5A23159DGS | Dual SPDT 1ohm Bidirectional Analog Switch with Off protection, VSSOP-10 |
| U2 | CH340K | USB serial converter, UART, SSOP-10 |
| U3 | ADUM3160 | Full/Low Speed, iCoupler USB Digital Isolator, 2.5kV protection |
| U4 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| C1,C3,C4,C6-C8 | 1u | Unpolarized capacitor, small symbol |
| C2,C5,C9-C12 | 0.1u | Unpolarized capacitor, small symbol |
| D1-D3 | LED_Small | Light emitting diode, small symbol |
| D4 | WS2812B5050 | RGB LED with integrated controller |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | USB_C_Receptacle_PowerOnly_6P | USB Power-Only 6P Type-C Receptacle connector |
| J3,J4 | Conn_01x18_Pin | Generic connector, single row, 01x18, script generated |
| R1,R2,R5,R6 | 4.7k | Resistor, small symbol |
| R3,R4,R11,R12 | 24 | Resistor, small symbol |
| R7-R10,R13-R17 | 10k | Resistor, small symbol |
| SW1-SW3 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |