Loading design…
Tecnun-eRacing
| Reference | Value | Description |
|---|---|---|
| IC1 | STM32F446RET6 | Arm Cortex-M4 32-bit MCU+FPU, 225 DMIPS, up to 512 KB Flash/128+4 KB RAM, USB OTG HS/FS, seventeen TIMs, three ADCs and twenty communication interfaces |
| IC2 | AL8861Y-13 | LED Lighting Drivers LED MV Int Switch |
| Q1 | TEMT6000X01 | Ambient Light Sensor 570nm SMD3 Vishay TEMT6000X01 +/-60 Visible Light Phototransistor, Surface Mount 3-Pin 1206 package |
| Q2,Q4 | ZXMN3F30FH | N-MOSFET transistor, drain/source/gate |
| U1 | TSR_1-2450 | 1A step-down regulator module, fixed 5V output voltage, 5-36V input voltage, -40°C to +85°C temperature range, TO-220 compatible LM78xx replacement |
| U2 | LM1117MP-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, SOT-223 |
| U3 | TCAN332 | High-Speed CAN Transceiver, 1Mbps, 3.3V supply, SOT-23-8/SOIC-8 |
| BOOT1 | BOOT0 | Single Pole Single Throw (SPST) switch |
| BTN1-BTN6,IN1-IN6,VCC1-VCC19 | Conn_01x01_Pin | Generic connector, single row, 01x01, script generated |
| C1-C9,C37 | 100n | Unpolarized capacitor, small symbol |
| C10-C17,C21,C23-C25,C27,C28,C30,C31 | 100nF | Unpolarized capacitor |
| C18,C22 | 18pF | Unpolarized capacitor |
| C19,C26,C41 | 10uF | Unpolarized capacitor |
| C20 | 0.1uF | Unpolarized capacitor |
| C29 | 2.2uF | Unpolarized capacitor |
| C32 | 1uF | Unpolarized capacitor |
| C33,C34 | 10 µF | Unpolarized capacitor |
| C35,C36 | 10u | Unpolarized capacitor |
| C38 | 4.7nF | Unpolarized capacitor |
| C39,C40 | 10p | Unpolarized capacitor |
| D1-D8 | WS2812B | RGB LED with integrated controller |
| D9 | NUP2105L | Dual Line CAN Bus Protector, 24Vrwm |
| D10 | D | Diode |
| DEBUG1 | DEBUG | Cortex Debug Connector, standard ARM Cortex-M SWD and JTAG interface |
| F1 | 500mA | Resettable fuse, polymeric positive temperature coefficient |
| FB1 | 120R | |
| FL1 | ACT45B-510-2P-TL003 | |
| H1-H4 | MountingHole_Pad | Mounting Hole with connection |
| J1 | BD125-10-A-0305-0580-L-B | Board to Board & Mezzanine Connectors 10 Contact 1.27mm keyed Pin hdr SMT Vert GF |
| J2 | FFC2B35-10-T | 10 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle |
| J3 | 43650-0400 | Micro-Fit 3.0 Right-Angle Header, 3.00mm Pitch, Single Row, 4 Circuits, with Snap-in Plastic Peg PCB Lock, Glow-Wire Capable, Black |
| JP1 | 120R Term | Solder Jumper, 3-pole, open |
| L1 | TCK-141 | |
| L2 | L | Inductor |
| LED1-LED8 | 158301260A | WL-SWTP SMT White LED Top view PLCC 3014; Cool White; CRI 85 typ. (@65 mA) 6000K; 26 lm; 2.8 V; 120 AlInGaN |
| NRST1 | RST | Single Pole Single Throw (SPST) switch |
| R1-R9,R22-R28,R37 | 10k | Resistor,Resistor, small symbol |
| R10 | 220R | Resistor |
| R11-R13,R15,R17,R18 | 100k | Resistor, small symbol |
| R14 | 300R | Resistor |
| R16,R19 | 10K | Resistor |
| R20,R21 | 60R | Resistor |
| R29-R32 | 18R | Resistor, small symbol |
| R33 | 0,16R | Resistor, small symbol |
| R35 | 470R | Resistor |
| R36 | 6R | |
| SW1 | USR_ENC | Rotary encoder, dual channel, incremental quadrate outputs, with switch |
| Y2 | C367183 | Four pin crystal, GND on pins 2 and 4 |