Breaklight
T0mmy312
Components (35)
| Reference | Value | Description |
|---|---|---|
| IC1 | BQ25895MRTWT | Single Cell 5A Fast Charger MaxCharge Technology for High Input Voltage and 3.1A Boost |
| IC2 | PCA9955BTWJ | NXP - PCA9955BTWJ - LED DRIVER, CONSTANT CURRENT, HTSSOP-28 |
| IC3 | ATTINY85-20SFR | 8-bit Microcontrollers - MCU 4KB 256BADC 20MHZ GRN |
| Q1,Q2 | Q_NMOS_Depletion_DSG | Depletion-mode N-channel MOSFET drain/source/gate |
| U1 | TPS63000-Q1 | Buck-Boost Converter, 1.8-5.5V Input Voltage, 1.8A Switch Current, Adjustable 1.2-5.5V Output Voltage, Automotive, VSON-10 |
| U2 | BQ298xy | Voltage and Current Protection for Single-Cell Li-Ion and Li-Polymer Batteries |
| U11 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
| BT1 | Battery_Cell | Single-cell battery |
| C1,C2 | 10uF | Unpolarized capacitor |
| C3,C4,C12,C14,CVDD1 | 0.1u | Unpolarized capacitor |
| C6 | 1u | Unpolarized capacitor |
| C7 | 47u | Unpolarized capacitor |
| C8,C15,C16 | 10u | Unpolarized capacitor |
| C11 | 0.1uF | Unpolarized capacitor |
| C13 | 4.7u | Unpolarized capacitor |
| C17 | 40u | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| L1 | 2.2uH | Inductor |
| L11 | 2.2u | Inductor |
| LED1-LED10 | LS_E65F-BBDA-1-1 | 2.15 V Red LED PLCC 4 SMD,Osram Opto Power TOPLED Lens LS E65F-BBDA-1-1 |
| R1 | 4.7k7 | Resistor |
| R2 | 4.7k | Resistor |
| R3 | 100 | Resistor |
| R4,R8-R12,R15-R19 | 10k | Resistor |
| R5 | 260 | Resistor |
| R6 | 2k2 | Resistor |
| R7 | 23 | Resistor |
| R13 | 1M | Resistor |
| R14 | 178k | Resistor |
| Ra1,Rd1 | 5k1 | Resistor |
| RBAT1,RVDD1 | 330 | Resistor |
| RPACK1 | 100k | Resistor |
| S1,S2 | CAS-120A1 | Surface Mount Slide Switch Single Pole Double Throw (SPDT) 100 (Non-Switching) mA, 100 (Switching) mA Slide |
| TP1-TP19 | TestPoint | test point |