fdcanhat
SverreOK
FDCANBus HAT for Raspberry Pi
Components (24)
| Reference | Value | Description |
|---|---|---|
| Q1 | NMOS | N-MOSFET transistor, drain/source/gate |
| Q2 | MMBT3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23 |
| U1 | MCP2518FD-xQBB | CAN FD Controller with SPI Interface, up to 8 Mbps, Vdd 2.7..5.5V, functional safety ready, VDFN-14 |
| U2 | TJA1051TK-3 | High-Speed CAN Transceiver, separate VIO, silent mode, VSON-8 (DFN-8) |
| U3 | LM74700 | Automotive, 3.2-V to 70-V, 80-µA reverse battery protection ideal diode controller |
| U4 | INA180 | 26V, 350kHz current sense amplifier |
| U17 | 74AHCT1G125 | Single Buffer Gate Tri-State, Low-Voltage CMOS |
| B1 | FUET-5030 | |
| C1,C5,C6,C9-C13,C18,C19,C102 | 100n 50V X7R | Unpolarized capacitor |
| C2-C4,C7,C8,C14,C101 | 1u 50V X7R | Unpolarized capacitor |
| C15-C17 | 10u 50V X7R | Unpolarized capacitor |
| D1 | SMBJ28CA | Bidirectional transient-voltage-suppression diode |
| D7 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
| D10-D13 | SK6812 | RGB LED with integrated controller |
| J1 | Conn_01x04_Mounting | Generic connector, single row with mounting pin |
| J2,J3 | XT30 M | Generic connector, single row with mounting pin |
| R1,R2 | 0R | Resistor |
| R3 | 120R | Resistor |
| R4,R49 | 10k | Resistor |
| R5 | 10m | Resistor |
| R47 | 220R | Resistor |
| R50 | 22R | Resistor |
| SW1 | SW_SPST | Single Pole Single Throw (SPST) switch |
| Y1 | 20 MHz | Four pin crystal, GND on pins 2 and 4 |