clock-mod
Se64s
Eurorack clock module based on free modular desing
Components (19)
| Reference | Value | Description |
|---|---|---|
| Q1-Q8 | MMBT3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23 |
| U1 | LM1117MP-5.0 | 800mA Low-Dropout Linear Regulator, 5.0V fixed output, SOT-223 |
| A1 | Arduino_Nano_v3.x | Arduino Nano v3.x |
| C1,C9,C10 | 100nF | Unpolarized capacitor, small symbol |
| C2 | 47uF | Polarized capacitor, small US symbol |
| C5,C6 | 10uF | Polarized capacitor, small US symbol |
| C7,C8 | 10nF | Unpolarized capacitor, small symbol |
| D1 | SS14 | 40V 1A Schottky Diode, SMA |
| D3-D10 | LED | Light emitting diode |
| FB1 | 1K 100MHz | Ferrite bead, small symbol |
| J1 | POWER | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2-J9 | AudioJack2_SwitchT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J10 | SSD1306_OLED | Generic connector, single row, 01x07, script generated |
| R1,R5-R10,R12,R16,R20,R27-R30 | 10k | Resistor, small US symbol |
| R2,R13,R17,R21,R31-R34 | 1k8 | Resistor, small US symbol |
| R3,R14,R18,R22,R35-R38 | 120 | Resistor, small US symbol |
| R4,R11,R15,R19,R23-R26 | 1k | Resistor, small US symbol |
| SW1 | ENC | Rotary encoder, dual channel, incremental quadrate outputs, with switch |
| SW2 | SW_Push | Push button switch, generic, two pins |