Loading design…
SaltyMelonYT
I'm a nerd
| Reference | Value | Description |
|---|---|---|
| U1 | RP2040 | A microcontroller by Raspberry Pi |
| U2 | NCP1117-3.3_SOT223 | 1A Low drop-out regulator, Fixed Output 3.3V, SOT-223 |
| U3 | W25Q16JVSS | 16Mbit / 2MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 (208 mil) |
| C1,C9 | 10u | Unpolarized capacitor |
| C2-C7,C10 | 100n | Unpolarized capacitor, small symbol |
| C8 | 2u2 | Unpolarized capacitor, small symbol |
| C11,C12 | 15p | Unpolarized capacitor, small symbol |
| J1 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| R1,R2 | 27.4 | Resistor |
| R3,R5 | 1k | Resistor, small symbol |
| R4 | DNF | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | ABMB-272-T3 | Four pin crystal, GND on pins 2 and 4 |