PCB-Designer-Intern-Assessment-
SID-nakati
This repository contains the complete submission for the internship assessment, covering both hardware (PCB design) and software (embedded C coding) tasks.
Components (15)
| Reference | Value | Description |
|---|---|---|
| U2 | Voltage Regulator | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U3 | STM32G0B1CBTx | STMicroelectronics Arm Cortex-M0+ MCU, 128KB flash, 144KB RAM, 64 MHz, 1.7-3.6V, 44 GPIO, LQFP48 |
| C1,C2 | 100nF / Capacitor | Unpolarized capacitor |
| C3 | 20pf / Capacitor | Unpolarized capacitor |
| C4,C6 | 22uF / Capacitor | Unpolarized capacitor |
| C5 | 20pF / Capacitor | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| J1 | USB 2.0 | USB 2.0-only 14P Type-C Receptacle connector |
| J2 | SWD Debugger 4 Pin Connector | Generic connector, single row, 01x04, script generated |
| J3 | UART 4 Pin Connector | Generic connector, single row, 01x04, script generated |
| J4 | I2C 4 Pin Connector | Generic connector, single row, 01x04, script generated |
| R1,R2 | 5.1k / Resistor | Resistor |
| R3 | 330 / Resistor | Resistor |
| R4,R5 | 4.7k / Resistor | Resistor |
| Y1 | 16MHz Crystal Oscillator | Four pin crystal, GND on pins 2 and 4 |