Loading design…
Robinhood-700
Proyecto que contiene el diseño de una placa en esp32 que permite establecer un gateway privado entre un enlace Ethernet y un enlace DECT.
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-WROOM-32E | ESP32 host controller |
| U2 | W5500 | Ethernet MAC+PHY SPI |
| U3 | nRF9151-SICA | nRF9151 for DECT NR+ |
| U4 | Ag9905M | PoE PD module 5V output |
| U5 | R-78B3.3-2.0 | Buck 3.3V/2A |
| U6 | CP2102N | USB-UART bridge |
| U7 |
| DTR/RTS to EN/BOOT network |
| C301,C302,SJ101-SJ104 | DNP | Interface link jumper,RF shunt capacitor (matching) |
|---|
| D7 | SS34 | USB to system 5V ORing diode |
|---|
| F2 | 500mA | USB VBUS fuse |
|---|
| J1 | RJ45_POE | RJ45 with magnetics |
|---|
| J2 | USB_C_PC | USB-C UFP |
|---|
| J3 | SMA_EXT_OMNI | SMA connector |
|---|
| L301,SJ201-SJ204 | 0R_MOUNTED | Interface link jumper,RF series inductor (matching) |
|---|
| R201,R202 | 5k1 | CC1 pull-down,CC2 pull-down |
|---|
| TP301 | TP_SWDIO_GND | SWD test pads (signal+GND) |
|---|
| TP302 | TP_SWDCLK_GND | SWD test pads (signal+GND) |
|---|