Loading design…
RiceC-at-MasonHS
Several schematics collected to show how common circuit elements are setup. The intent is that these designs can be used to inspire student-designed circuits.
| Reference | Value | Description |
|---|---|---|
| Q1,Q3 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q2 | NMOS | N-MOSFET transistor, drain/source/gate |
| Q4,Q5 | BPW40 | Phototransistor NPN |
| U1,U2,U7,U8 | ICM7555xP | CMOS General Purpose Timer, 555 compatible, PDIP-8 |
| U3 | 4017 | Johnson Counter ( 10 outputs ) |
| U4,U5 | L293D | Quadruple Half-H Drivers |
| U6 |
| Optocoupler, LED Input, Photocell Output |
| BT1-BT5 | Battery | Multiple-cell battery |
|---|
| C1 | 3300uC | Polarized capacitor, US symbol |
|---|
| C2-C4 | 200nf | Unpolarized capacitor |
|---|
| C5,C6,C9 | C_Polarized_US | Polarized capacitor, US symbol |
|---|
| C7,C8,C10,C11 | 0.01uF | Unpolarized capacitor |
|---|
| D1-D12,D15,D16,D20,D21 | LED | Light emitting diode |
|---|
| D13,D14 | D | Diode |
|---|
| D17 | APA-106-F5 | RGB LED with integrated controller, 5mm Package |
|---|
| D18 | LED_KRGB | RGB LED, cathode/red/green/blue |
|---|
| D19 | LED_ARGB | RGB LED, anode/red/green/blue |
|---|
| LA1 | Lamp | Lamp |
|---|
| M1,M2,M5 | Motor_DC | DC Motor |
|---|
| M3 | Stepper_Motor_bipolar | 4-wire bipolar stepper motor |
|---|
| M4 | Motor_Servo_Hitec | Servo Motor (HiTec connector) |
|---|
| R1 | R_Photo (200k-500) | Photoresistor |
|---|
| R2,R3,R5-R10,R48,R49 | 10k | Resistor, US symbol |
|---|
| R4 | 220 | Resistor, US symbol |
|---|
| R11-R15,R26,R27,R29-R37,R39-R43,R46,R47,R50,R53-R56,R58-R60 | R_US | Resistor, US symbol |
|---|
| R16-R25 | 330 | Resistor, US symbol |
|---|
| R28,R38,R44,R45 | R_Photo | Photoresistor |
|---|
| R51,R52,Ra?,Rb? | R_Variable_US | Variable resistor, US symbol |
|---|
| RV1 | R_Potentiometer_US | Potentiometer, US symbol |
|---|
| SW1-SW11 | SW_Push | Push button switch, generic, two pins |
|---|