Loading design…
Rehabilitation-Innovation
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | NMOS | N-MOSFET transistor, gate/source/drain |
| Q3 | NTR1P02T1G | P-MOSFET transistor, gate/source/drain |
| U1 | RP2350B-QFN80 | |
| U2 | BQ29700DSER | Voltage and Current Protection for Single-Cell Li-Ion and Li-Polymer Batteries |
| U3 | BQ24073RGT | USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16 |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U5 |
| 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U6 | ESP-PSRAM64 | 32 Mbit serial pseudo SRAM device organized as 4Mx8 bits, 1.8 VCC, SOIC8 (SOP8) |
|---|
| U7 | MCP6002-xSN | 1MHz, Low-Power Op Amp, SOIC-8 |
|---|
| U8 | TLV61070ADBV | Boost Converter, 2.5A switch current limit, 2.2-5.5V Output Voltage, 0.5-5.5V Input Voltage, SOT-23-6 |
|---|
| U10,U11 | PAM8302AAS | 2.5W Filterless Class-D Mono Audio Amplifier, MSOP-8 |
|---|
| C1-C11,C13,C18,C20,C25,C27,C36,C40,C48 | 100n | Unpolarized capacitor |
|---|
| C12,C16,C17,C19,C29 | 4u7 | Unpolarized capacitor |
|---|
| C14,C15 | 15p | Unpolarized capacitor |
|---|
| C21,C23,C38,C39,C44-C47 | 10u | Unpolarized capacitor |
|---|
| C22,C24,C30-C32,C43 | 22u | Unpolarized capacitor |
|---|
| C26,C28,L2 | 2u2 | Inductor,Unpolarized capacitor |
|---|
| C33-C35,C37,C41,C42 | 1u | Unpolarized capacitor |
|---|
| D1,D10,D11 | BLUE | Light emitting diode |
|---|
| D2,D15,D16 | AMBER | Light emitting diode |
|---|
| D3-D6 | WS2812 | RGB LED with integrated controller |
|---|
| D12 | RED | Light emitting diode |
|---|
| D13,D14 | GREEN | Light emitting diode |
|---|
| FB3-FB6 | 600R@100MHz | Ferrite bead |
|---|
| J1 | SWD-DAPLink | Generic connector, single row, 01x03, script generated |
|---|
| J2 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J3 | L Channel | Generic connector, single row, 01x02, script generated |
|---|
| J4 | R Channel | Generic connector, single row, 01x02, script generated |
|---|
| J5 | JST | Generic connector, single row, 01x02, script generated |
|---|
| J6 | Pack Temp | Generic connector, single row, 01x02, script generated |
|---|
| J7 | HDMI_A | HDMI type A connector |
|---|
| J8 | Inputs | Generic connector, single row, 01x05, script generated |
|---|
| J9 | Button Pulls | Generic connector, single row, 01x02, script generated |
|---|
| J10 | Conn_01x40 | Generic connector, single row, 01x40, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J11,J12 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
|---|
| J13 | Micro_SD_Card | Micro SD Card Socket |
|---|
| J14 | Through Hole | Generic connector, single row, 01x02, script generated |
|---|
| J15 | Conn_01x09_Pin | Generic connector, single row, 01x11, script generated |
|---|
| JP1-JP11 | Jumper_2_Open | Jumper, 2-pole, open |
|---|
| L1 | 3u3 | Inductor |
|---|
| R1,R2 | 27R | Resistor |
|---|
| R3,R7,R9,R13-R16,R19,R20,R27,R49-R54 | 1k | Resistor |
|---|
| R4 | 33R | Resistor |
|---|
| R5,R6 | 5k1 | Resistor |
|---|
| R8,R10,R18,R21,R22,R34-R40,R47,R48,R55-R57,R59,R60 | 10k | Resistor |
|---|
| R11 | 2k2 | Resistor |
|---|
| R12 | 330R | Resistor |
|---|
| R17 | 47k | Resistor |
|---|
| R23 | 15k | Resistor |
|---|
| R24 | 4k7 | Resistor |
|---|
| R25,R26,R28-R33 | 220R | Resistor |
|---|
| R41,R42 | 5M1 | Resistor |
|---|
| R43 | 100k | Resistor |
|---|
| R44-R46 | 2R | Resistor |
|---|
| R58 | 20k | Resistor |
|---|
| RV1 | R_Potentiometer | Potentiometer |
|---|
| SW1,SW2 | NRST | Single Pole Single Throw (SPST) switch |
|---|
| SW3 | BOOTSEL | Single Pole Single Throw (SPST) switch |
|---|
| SW7,SW8 | SW_SPDT | Switch, single pole double throw |
|---|
| Y1 | ABM8-272-T3 [12MHz] | Four pin crystal, GND on pins 2 and 4 |
|---|