kicad-ws
RRST-NHK-Project
基板・回路関連
Components (18)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | SS8050-G | |
| U1 | CH340C | USB serial converter, crystal-less, UART, SOIC-16 |
| U10 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U11 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C3,C8,C9 | 22uF/10V(20%) | Unpolarized capacitor |
| C4,C6,C7 | 0.1uF/50V(10%) | Unpolarized capacitor |
| C5 | 0.1uF/50V(10%)(NC) | Unpolarized capacitor |
| C10,C11 | 100nF | Unpolarized capacitor |
| D1,D2,D4 | LESD5D5.0CT1G | |
| D3 | BAT760-7 | |
| D5-D7 | LED | Light emitting diode |
| J1,J3 | Conn_01x19_Pin | Generic connector, single row, 01x19, script generated |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R2 | 1K | Resistor |
| R3,R4 | 5.1K | Resistor |
| R5,R6,R17 | 10K(5%) | Resistor |
| R18 | 2K(5%) | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |