Loading design…
QuinnFreedman
A collection of free & open source DIY synthesizer module designs for Eurorack
| Reference | Value | Description |
|---|---|---|
| U1 | MCP4922 | 2-Channel 12-Bit D/A Converters with SPI Interface |
| U2 | TL072 | Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8 |
| U3 | MCP6002 | 1MHz, Low-Power Op Amp, MSOP-8 |
| A1 | Arduino Nano v3 | Arduino Nano v3.x |
| C1-C4 | 100nF | Unpolarized capacitor |
| C5-C7 | 10uF | Polarized capacitor, US symbol |
| C8 | 4.7nF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| J1-J3 | THONKICONN | 2-pin audio jack receptable (mono/TS connector) with switching contact |
| J4 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J5 | Conn_01x06_Socket | Generic connector, single row, 01x06, script generated |
| J6 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J7 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J9 | Eurorack_2x8_Power | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R5 | 1kΩ | Resistor |
| R2-R4 | 24kΩ | Resistor |
| R6,R7 | 100kΩ | Resistor |
| RV1,RV2 | 10kΩ | |
| RV3 |
| 50kΩ |
| SW1 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
|---|