Loading design…
QuinnFreedman
A collection of free & open source DIY synthesizer module designs for Eurorack
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | 2N3904 | NPN transistor, emitter/base/collector |
| U1 | NE555P | Precision Timers, 555 compatible, PDIP-8 |
| U2 | TL072 | Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8 |
| U3 | TEA1-0505 | 1W DC/DC converter unregulated, 4.5-5.5V input, 5V output voltage, 200mA output, 1.5kVDC isolation, SIP-4 |
| U4 | PC817 | DC Optocoupler, Vce 35V, CTR 50-300%, DIP-4 |
| U5 | MCP4922 | 2-Channel 12-Bit D/A Converters with SPI Interface |
| A1 | Arduino_Nano_v3.x | Arduino Nano v3.x |
| C1 | 10nF | Unpolarized capacitor |
| C2 | 1nF | Unpolarized capacitor |
| C3,C4,C7-C9 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
|---|
| C6,C12 | 10uF | Polarized capacitor, US symbol |
|---|
| C10 | 100pF | Unpolarized capacitor, small symbol |
|---|
| D1 | LED | Light emitting diode |
|---|
| J1-J6 | THONKICONN | 2-pin audio jack receptable (mono/TS connector) with switching contact |
|---|
| J7 | Eurorack_2x8_Power | Generic connector, double row, 02x08, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J14 | Conn_01x06_Socket | Generic connector, single row, 01x06, script generated |
|---|
| J15 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
|---|
| J18 | Conn_01x07_Socket | Generic connector, single row, 01x07, script generated |
|---|
| J19 | Conn_01x07_Pin | Generic connector, single row, 01x07, script generated |
|---|
| R1,R6,R7,R13-R17 | 1kΩ | Resistor |
|---|
| R2,R3 | 1MΩ | Resistor |
|---|
| R4,R5 | 100kΩ | Resistor |
|---|
| R8,R11,R12 | 10kΩ | Resistor |
|---|
| R9,R10 | 220kΩ | Resistor |
|---|
| R18 | 100Ω | Resistor |
|---|
| RV1-RV3 | 50kΩ | Potentiometer |
|---|