Mainboard
PyroVision-ThermalCam
Mainboard for the PyroVision thermal camera.
Components (46)
| Reference | Value | Description |
|---|---|---|
| IC701 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| IC702 | BQ21040DBV | Single cell, 0.8A Li-Ion/Li-Po linear charge management controller, up to 30V input, 4.2V charge voltage, Open-Drain Status Output, Temperature sense input, SOT-23-6 |
| IC703 | MAX17048 | |
| IC801,IC805 | LP5907MFX-2.8 | 250-mA Ultra-Low-Noise Low-IQ LDO, 2.8V, SOT-23 |
| IC802 | LP5907MFX-1.5 | 250-mA Ultra-Low-Noise Low-IQ LDO, 1.5V, SOT-23 |
| IC803 | TPS62823DLC | 3A Step-Down Converter with DCS-Control, adjustable output, 2.4-5.5V input voltage, QFN-8 |
| IC804 | LP5907MFX-3.0 | 250-mA Ultra-Low-Noise Low-IQ LDO, 3.0V, SOT-23 |
| IC806 | LP5907MFX-1.2 | 250-mA Ultra-Low-Noise Low-IQ LDO, 1.2V, SOT-23 |
| IC1001,IC1003 | TXB0104RUT | 4-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, Texas_PUQFN-12 |
| IC1002,IC1103,IC1202 | PCA9306JK | Dual bidirectional I2C Bus and SMBus voltage level translator |
| IC1101 | PCAL6416AHF | IO expander 16 GPIO, I2C 400kHz, Interrupt, 1.65 - 5.5V, HWQFN-24 |
| IC1102 | TMP117xxYBG | Digital Temperature Sensor with I2C/SMBus Interface, 16 bits, ±0.3°C, one-shot conversion, alert, nist traceable, EEPROM, WSON |
| IC1104 | PCA9633DP1,118 | NXP PCA9633DP1,118, LED Driver 8-Segments, 2.5 V, 3.3 V, 5 V, 8-Pin TSSOP |
| IC1105 | RV-8263-C8 | |
| IC1106 | VL53L1CXV0FY1 | 4m distance ranging ToF sensor, Optical LGA12 |
| IC1201 | TXB0102DCU | 2-Bit Bidirectional Voltage-Level Translator With Auto Direction Sensing and ±15-kV ESD Protection, VSSOP-8 |
| Q701 | Si2333CDS | -5.1A Id, -12V Vds, P-Channel MOSFET, SOT-23 |
| Q1101,Q1102 | DMN2053UQ | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| C701,C702,C802-C805,C807-C812,C901 | 1u | Unpolarized capacitor |
| C703,C902,C1001,C1002,C1004,C1101-C1106,C1301 | 100n | Unpolarized capacitor |
| C801,C1107 | 4u7 | Unpolarized capacitor |
| C806 | 10u | Unpolarized capacitor |
| C1003,C1201 | 10n | Unpolarized capacitor |
| D1101,D1102 | Flash | Light emitting diode |
| F701 | 6 V / 4.5 A | Resettable fuse, polymeric positive temperature coefficient |
| L801 | 470n | Inductor |
| M901 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| R701,R702 | 5k1 | Resistor |
| R703,R709 | 1k | Resistor |
| R706,R707,R711,R1002,R1201 | 0R | Resistor |
| R801,R1001,R1003,R1101-R1103,R1106,R1115,R1202,R1203,R1401-R1405 | 100k | Resistor |
| R804 | 45k3 | Resistor |
| R805,R903,TH701 | 10k | Resistor |
| R901,R902,R1004,R1005,R1111,R1112 | 3k3 | Resistor |
| R1006,R1110,R1206 | 200k | Resistor |
| R1104,R1107 | 10R | Resistor |
| R1204,R1205 | 2k8 | Resistor |
| SW801 | On / Off | Switch, single pole double throw |
| SW901 | Reset | Generic push-button switch, two contact pins and shield pin(s) |
| X701 | USB | USB 2.0-only 14P Type-C Receptacle connector |
| X702 | Battery | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| X1001 | LEPTON | Generic connector, double row, 02x16, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| X1201 | Camera | Generic connectable mounting pin connector, single row, 01x24, script generated (kicad-library-utils/schlib/autogen/connector/) |
| X1301 | Micro SD-Card | Micro SD Card Socket with one card detection pin |
| X1401 | Displayboard | Generic connectable mounting pin connector, single row, 01x14, script generated (kicad-library-utils/schlib/autogen/connector/) |
| Y1001,Y1201 | 25 MHz | Crystal Clock Oscillator, Abracon ASCO |