Kicad_Projects
Paa-Kwasi-04
Components (25)
| Reference | Value | Description |
|---|---|---|
| U1 | MP1584EN-LF-Z | |
| U2 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U3 | CP2102N-Axx-xQFN24 | USB to UART master bridge, QFN-24 |
| U4 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U5 | CR2013-MI2120 | ILI9341 controller, SPI TFT LCD Display, 9-pin breakout PCB, 4-pin SD card interface, 5V/3.3V |
| C1,C3,C13 | 10uF | Unpolarized capacitor |
| C2 | 0.1uF | Unpolarized capacitor |
| C4,C5,C11 | 22uF | Unpolarized capacitor |
| C6 | 10nF | Unpolarized capacitor |
| C7 | 100nF | capacitor, US symbol |
| C8-C10,C12 | 0.1µF | capacitor, US symbol |
| D1,D2 | ESD5Zxx | ESD Protection Diode, SOD-523 |
| D3 | LED | Light emitting diode |
| F1 | Fuse | Fuse |
| J1 | UART header | Generic connector, single row, 01x04, script generated |
| J2 | GPIO | Generic connector, single row, 01x10, script generated |
| L1 | 3uH | Inductor |
| P1 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| R1,R2 | 5.1KΩ | Resistor, US symbol |
| R3 | 31KΩ | Resistor, US symbol |
| R4 | 100KΩ | Resistor, US symbol |
| R5,R7-R11 | 10KΩ | Resistor, US symbol |
| R6 | 1KΩ | Resistor, US symbol |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP3V3,TPGND1,TP_CSd1,TP_CSm2,TP_DC1,TP_D_reset1,TP_EN1,TP_MISO1,TP_MOSI1,TP_RTS1,TP_RX1,TP_SCLK1,TP_TX1 | TestPoint | test point |