OpenKNX-UP1
OpenKNX
OpenKNX system UP1
Components (29)
| Reference | Value | Description |
|---|---|---|
| Q1 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U100 | RP2040 | A microcontroller by Raspberry Pi |
| U101 | W25Q | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U102 | MAX803R | reset ic 2.63V |
| C10 | 3300uF | Polarized capacitor |
| C11,C12,C20,C30,C100,C109 | 10u | Unpolarized capacitor |
| C50-C53,C103,C105,C110-C115,C131,C132 | 100n | Unpolarized capacitor |
| C101,C102 | 33p | Unpolarized capacitor |
| C120,C130 | 1u | Unpolarized capacitor |
| D50,D51 | MDD SM03C | TVS Diode Array, 5.5V Standoff, 2 Channels, SOT-23 package |
| D101 | LED | Light emitting diode |
| D110 | RS-3535MWAR-2JYJY-J | |
| GN100 | NanoBCU V2 | |
| J10 | LD2420 / TOFx | Generic connector, double row, 02x06, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J20 | VEML7700 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J30 | I2C Sensor Extension | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J40 | Extension | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J50 | Binary Inputs | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J100 | KNX_Conn | KNX connector 2 pin 01x02 |
| J101 | UP1-Prog | |
| R10,R107,R108 | 22 | Resistor |
| R11 | 10k | Resistor |
| R50,R52,R54,R56 | 2k2 | Resistor |
| R51,R53,R55,R57,R106 | 220 | Resistor |
| R101-R103,R105 | 1k | Resistor |
| R110 | 120 | Resistor |
| R111,R112 | 33 | Resistor |
| SW100 | Prog | Push button switch, generic, two pins |
| Y100 | 12MHz | Four pin crystal, GND on pins 2 and 4 |