sensor-board
Nyaigoti
Components (41)
| Reference | Value | Description |
|---|---|---|
| Q1 | TEMT6000X01 | |
| Q2,Q3 | BC817 | 0.8A Ic, 45V Vce, NPN Transistor, SOT-23 |
| U1 | MCP73871 | Single cell, Li-Ion/Li-Po charge management controller |
| U2 | LM1117DT-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U3 | ESP32-C3-WROOM-02 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| U4 | CP2102N-A02-GQFN20 | |
| U5 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U6 | W25Q32JVSSIQ | |
| U7 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| U8 | MAX4466EXK | |
| C1-C3,C5,C8,C9,C11,C12,C14-C16,C19,C23,C25,C26 | 0.1u | Unpolarized capacitor |
| C4,C6,C7,C13,C20 | 10u | Polarized capacitor,Unpolarized capacitor |
| C10 | 4.7u | Polarized capacitor |
| C17,C18,C22 | 10n | Unpolarized capacitor |
| C21 | 100p | Unpolarized capacitor |
| D1,D4,D6 | Red | Light emitting diode |
| D2,D5 | Green | Light emitting diode |
| D3 | Blue | Light emitting diode |
| F1 | Fuse | Fuse |
| FB1 | FBMJ2125HM330-T | |
| J1 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J2 | GSD090012SEU | |
| J3 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| MK1 | CMC-5042PF-AC | |
| P1 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| R1 | 5k1 | Resistor |
| R2,R3,R19,R30,R31 | 10k | Resistor |
| R4 | 2k | Resistor |
| R5 | 20k | Resistor |
| R6-R8 | 470 | Resistor |
| R9,R13,R14 | 330 | Resistor |
| R10,R23 | 1k | Resistor |
| R11 | 22k1 | Resistor |
| R12 | 47k5 | Resistor |
| R15-R18 | 50 | Resistor |
| R20-R22 | 4k7 | Resistor |
| R24 | 22k | Resistor |
| R25 | 35WR100KLFTR | |
| R26,R27 | 1M | Resistor |
| R28,R29 | 2K | Resistor |
| SW3,SW4 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |