PM-remote-controlled-vehicle
Nico7777777
My project for PM Fair 2026
Components (15)
| Reference | Value | Description |
|---|---|---|
| U1 | MT3608 | High Efficiency 1.2MHz 2A Step Up Converter, 2-24V Vin, 28V Vout, 4A current limit, 1.2MHz, SOT23-6 |
| U2,U3 | ATmega328P-P | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28 |
| U4 | L298N | Dual full bridge motor driver, up to 46V, 4A, Multiwatt15-V |
| BACK1,BACK2,BACK?,LEFT? | SW_Push_Dual | Push button switch, generic, symbol, four pins |
| BT1 | 3.7v | Single-cell battery |
| BT2 | Battery_Cell | Single-cell battery |
| C1,C2 | 22uF | Unpolarized capacitor |
| crystal_1,crystal_2 | 16MHz | Two pin crystal |
| D1 | LED | Light emitting diode |
| L1 | 22uH | Inductor |
| M1,M2 | Motor_DC | DC Motor |
| R1-R4 | 680 | Resistor |
| R5 | 2K2 | Resistor |
| RV1 | 100K | Potentiometer |
| SW1 | SW_Nidec_CAS-120A1 | Switch, single pole double throw |