kicad-archive
Netetra
Components (21)
| Reference | Value | Description |
|---|---|---|
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U2 | NJM12888 | |
| U3 | CH340N | USB serial converter, 2Mbps, UART, JEITA SOIC-8 (SOP-8) |
| U4 | STM32F303K8Tx | STMicroelectronics Arm Cortex-M4 MCU, 64KB flash, 16KB RAM, 72 MHz, 2.0-3.6V, 25 GPIO, LQFP32 |
| U5 | MCP2562-E-SN | High-Speed CAN Transceiver, 1Mbps, 5V supply, Vio pin, -40C to +125C, SOIC-8 |
| C1,C4-C11,C14 | 0.1uF | Unpolarized capacitor |
| C2 | 0.22uF | Unpolarized capacitor |
| C3 | 4.7uF | Unpolarized capacitor |
| C12,C13 | 20pF | Unpolarized capacitor |
| D1 | Blue | Light emitting diode |
| D2,D3 | Orange | Light emitting diode |
| J1 | USB_A | USB Type A connector |
| J2 | Debug | Generic connector, single row, 01x03, script generated |
| J3 | CAN | Generic connector, single row, 01x02, script generated |
| J4 | Reset | Generic connector, single row, 01x02, script generated |
| R1-R3,R5,R6 | 1kΩ | Resistor |
| R4 | 10kΩ | Resistor |
| R7 | 120Ω | Resistor |
| SW1 | Boot | Push button switch, generic, two pins |
| SW2 | CAN_R_SW | Switch slide, single pole double throw |
| Y1 | 16MHz | Two pin crystal |