kicad-archive
Netetra
Components (24)
| Reference | Value | Description |
|---|---|---|
| Q1-Q6 | BSC030N08NS5 | 100A Id, 80V Vds, OptiMOS N-Channel Power MOSFET, 3.0mOhm Ron, Qg (typ) 61.0nC, PG-TDSON-8 |
| U1,U2 | XC9704B75CPR-G | |
| U3 | NJM12888 | |
| U4 | STM32F303K8Tx | STMicroelectronics Arm Cortex-M4 MCU, 64KB flash, 16KB RAM, 72 MHz, 2.0-3.6V, 25 GPIO, LQFP32 |
| U5 | MCP2562-E-SN | High-Speed CAN Transceiver, 1Mbps, 5V supply, Vio pin, -40C to +125C, SOIC-8 |
| U6-U8 | IR2302 | Half-Bridge Driver, 600V, 200/350mA, PDIP-8/SOIC-8 |
| C1-C4,C6,C7 | C | Unpolarized capacitor |
| C5,C12-C15,C18-C20 | 0.1uF | Unpolarized capacitor |
| C8,C9 | 20pF | Unpolarized capacitor |
| C10 | 0.22uF | Unpolarized capacitor |
| C11 | 4.7uF | Unpolarized capacitor |
| C16,C21-C23 | 1uF | Unpolarized capacitor |
| C17 | 0.01uF | Unpolarized capacitor |
| D1-D3 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
| FB1 | BLM18R | Ferrite bead |
| J1 | Power | Generic connector, single row, 01x02, script generated |
| J2 | CAN | Generic connector, single row, 01x02, script generated |
| J3 | Encoder | Generic connector, single row, 01x05, script generated |
| J4 | Output | Generic connector, single row, 01x03, script generated |
| L1,L2 | L | Inductor |
| R1-R3,R8,R15-R20 | 10kΩ | Resistor |
| R4-R7 | R | Resistor |
| R9-R14 | 10Ω | Resistor |
| Y1 | 16MHz | Two pin crystal |