SnakeCYD
Nadoooor
a custom CYD, all in an PCB with snake style
Components (22)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | TFT_320x240 | |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1 | 10uf | Unpolarized capacitor |
| C2,C5-C8,C10 | 0.1 uF | Unpolarized capacitor |
| C3,C4,C9 | 10uF | Unpolarized capacitor |
| C11 | 1uF | Unpolarized capacitor |
| D1 | SK6812 | RGB LED with integrated controller |
| D5 | 1N5819WS | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| D6 | LED | Light emitting diode |
| D7-D9 | LESD5D5.0CT1G | Transient Voltage Suppressors for ESD Protection |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | UART | Generic connector, single row, 01x04, script generated |
| J3 | I2C_1 | Generic connector, single row, 01x04, script generated |
| J4 | SPI | Generic connector, single row, 01x06, script generated |
| J5 | I2C_2 | Generic connector, single row, 01x04, script generated |
| J6 | 0UART | Generic connector, single row, 01x04, script generated |
| J7 | GPIO | Generic connector, single row, 01x10, script generated |
| R1,R2 | 5k | Resistor |
| R3 | 7.5k | Resistor |
| R4-R7 | 10k | Resistor |
| SW1-SW3 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |