nturt_kicad
NTURacingTeam
kicad files
Components (28)
| Reference | Value | Description |
|---|---|---|
| Q1 | MMBT3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, SOT-23 |
| U1 | RT9193 | SOT-23-5 3.3V 300mA low dropout voltage regulator with enable and reference bypass, Alternate KiCad Library |
| U2 | STM32F103CBT6 | STMicroelectronics Arm Cortex-M3 MCU, 128KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U3 | LM66100DCK | Ideal Diode With Input Polarity Protection 1.5 - 5.5V Input Voltage, 1.5A Output Current, Ron 141 mOhm, SC-70-6 |
| C1,C2 | 1u | Unpolarized capacitor, small symbol |
| C3 | 22n | Unpolarized capacitor, small symbol |
| C4-C7 | 10u 6V | Unpolarized capacitor, small symbol |
| C8-C11 | 0u1 | Unpolarized capacitor, small symbol |
| C12,C13 | 30p | Unpolarized capacitor, small symbol |
| D1 | BLUE LED | Light emitting diode, small symbol |
| D2 | RED LED | Light emitting diode, small symbol |
| D3 | GREEN led | Light emitting diode |
| D4 | RED led | Light emitting diode |
| F1 | 0.5A | Fuse, small symbol |
| J1 | STDC14 | Generic connector, double row, 02x07, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | S_SWD | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | USB_C_stm32 | USB 2.0-only 16P Type-C Receptacle connector |
| R1 | 0R | Resistor, small symbol |
| R2,R3 | 1k | Resistor, small symbol |
| R5,R6,R8,R9,R23,R24 | 20R | Resistor, small symbol |
| R10,R14 | 220R | Resistor, small symbol |
| R11 | 100k | Resistor, small symbol |
| R12,R13,R15,R17 | 10k | Resistor, small symbol |
| R16,R18 | 100R | Resistor, small symbol |
| R19 | 33k | Resistor, small symbol |
| R20,R21 | 5k1 | Resistor |
| R22 | 1k5 | Resistor, small symbol |
| Y2 | 8MHz | Four pin crystal, GND on pins 2 and 4 |