nturt_kicad
NTURacingTeam
kicad files
Components (27)
| Reference | Value | Description |
|---|---|---|
| U1 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1,C2 | 47u 10V | Unpolarized capacitor, small symbol |
| C3 | 0u1 | Unpolarized capacitor, small symbol |
| D1 | RED 3V3 | Light emitting diode |
| D2 | RED 5V | Light emitting diode |
| D3 | RED T_VCC | Light emitting diode |
| J1 | Jlink20p | Generic connector, double row, 02x10, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | SWD | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11,TP1,TP2 | T_VCC | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/),test point |
| J12 | VCP_UART | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | 5V | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J17 | STDIC 14p | ST Debug Connector, standard ARM Cortex-M SWD and JTAG interface plus UART |
| JP1 | 3.3V T_VCC | Jumper, 2-pole, open |
| R1-R3 | 1k | Resistor |
| SW1 | TS-1187A-B-A-B | Push button switch, generic, two pins |
| TP3 | T_JRCLK/NC | test point |
| TP4 | GND_DETECT | test point |
| TP5 | T_VCP_RX | test point |
| TP8 | T_JTMS/SWDIO | test point |
| TP9 | T_JCLK/SWCLK | test point |
| TP10 | T_JTDO/SWO | test point |
| TP11 | T_NRST | test point |
| TP12 | T_JTDI/NC | test point |
| TP13 | T_VCP_TX | test point |
| TP14 | nRESET | test point |
| TP15 | DBGRQ | test point |
| TP16 | +5V | test point |