Electrospinning-device
NCMST
Device for electrospinning process based on Arduino Mega.
Components (15)
| Reference | Value | Description |
|---|---|---|
| Q1 | FDB13AN06A0 | TO-263 N-MOSFET enchancement mode transistor, 60V, 62A, 115W, Alternate KiCAD Library |
| Q2 | IRLZ34N | TO-220 N-MOSFET enchancement mode transistor, 55V, 30A, 68W, Alternate KiCAD Library |
| U1 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| C5-C7 | 10nF | Unpolarized capacitor |
| D3-D5 | 1N4148WS | 75V 0.15A Fast switching Diode, SOD-323 |
| J1 | STLINK | Pin Header male with pin space 2.54mm. Pin Count -4 |
| J2 | LCD | Pin Header male with pin space 2.54mm. Pin Count -4 |
| J3 | ATX-24 | ATX Power supply 24pins |
| J5 | Transformer | Pin Header male with pin space 2.54mm. Pin Count -2 |
| J6 | Motor 1 | Pin Header male with pin space 2.54mm. Pin Count -8 |
| J7 | Motor 2 | Pin Header male with pin space 2.54mm. Pin Count -8 |
| JP2 | VBAT | Jumper, 2-pole, closed/bridged |
| R11-R17 | 10k | Resistor |
| R18,R19 | 1k | Resistor |
| S1 | PEC11R-4215F-S0024 | ROTARY ENCODER MECHANICAL 24PPR |