JedlikBots
NBence0
Components (79)
| Reference | Value | Description |
|---|---|---|
| Module1 | ComputeModule5-CM5 | RaspberryPi Compute module 5 |
| U1 | TC1015-xCT | 100 mA CMOS LDOs with Shutdown and Reference Bypass, SOT-23-5 |
| U2 | RT9742SNGV | |
| U3,U13 | AP22653W6 | |
| U4,U5,U9 | TPD4EUSB30 | |
| U6 | AP22815AWU | Current limited power switch, single channel, 3.0V to 5.5V, 3A, SOT-23-6 |
| U7 | ASEK-32.768KHZ-L-R-T | |
| U8,U10 | FSUSB42MUX | |
| U11 | USB2514B-I/M2 | USB 2.0 Hi-Speed Hub Controller |
| U12 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U14 | TS5A23157DGSR | |
| U15,U17 | LSF0108PWR | |
| U16,U18 | TCA9548APWR | Low voltage 8-channel I2C switch with reset, TSSOP-24 |
| U19 | MCP23S17_SS | 16-bit I/O expander, SPI, interrupts, w pull-ups, SOIC-28 |
| U20 | CD74HC154M | |
| U21 | XC6206P332MR | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U22 | MCP3208 | A/D Converter, 12-Bit, 8-Channel, SPI Interface , 2.7V-5.5V |
| U23 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| U24 | BNO085 | |
| U25 | ICM-45686 | |
| U27 | PCM2704CDBR | |
| U28 | TPA6203A1DGN | 1.25W, Mono, Differential Audio Amplifier, MSOP-8 |
| BT1 | Battery_Cell | |
| C1-C4,C7,C8,C13,C15,C18,C19,C21,C26,C27,C36,C39,C42,C44,C45,C47,C59 | 100nf | Unpolarized capacitor |
| C5,C6 | 330pf | Unpolarized capacitor |
| C9,C11,C12,C29,C62,CT6,CT9 | 10uF | Polarized capacitor,Polarized capacitor, small symbol,Unpolarized capacitor |
| C10,C66,C71,CT1-CT5,CT7,CT8,CT10 | 100uF | Polarized capacitor,Polarized capacitor, small symbol |
| C14,C17,C24,C25,C28,C31-C35,C38,C41,C46,C60,C61,C63-C65,C67,C72 | 1uf | Polarized capacitor,Unpolarized capacitor |
| C16,C20,C30,C40,C43,C48,C58,C68,C69,C73 | 22nf c0g | Unpolarized capacitor |
| C22,C23,C56,C57 | 22pf | Unpolarized capacitor |
| C37 | 68pf | Unpolarized capacitor |
| D1-D10 | LED | Light emitting diode |
| DSI1 | dsi | |
| DSI2 | dsi1 | |
| DSW1 | SW_DIP_x08 | 8x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| GPIO10,TP9,TP10 | TestPoint | test point |
| I2C_0x70_1-I2C_0x70_8,I2C_0x71_1-I2C_0x71_8 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| I2C_1 | for default bus | Generic connector, single row, 01x04, script generated |
| J1 | Power Input | Generic connector, double row, 02x04, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | from psu panel | Generic connectable mounting pin connector, single row, 01x40, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3,J5 | HDMI | |
| J4 | USB3_A | |
| J6 | RGB-BTN | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | MagJack-A70-112-331N126 | |
| J8 | Fan | Generic connector, single row, 01x04, script generated |
| J9 | Conn_01x10_Socket | Generic connectable mounting pin connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Bus_M.2_Socket_M | M.2 Socket 3 Mechanical Key M |
| J11 | USB_C_FLASH-RPI | USB 2.0-only 16P Type-C Receptacle connector |
| J12 | USB_C_ESP | USB 2.0-only 16P Type-C Receptacle connector |
| J13 | 690-008-221-904 | |
| R1-R4 | 0R | |
| R5,R30,R31,R42-R84,R86-R92 | 2.2K | Resistor |
| R6,R40 | 15K | Resistor |
| R7,R11,R15,R25,R93,R94,R96-R99,R102,R104,R106,R108,R110,R113,R116,R134,R136 | 1K | Resistor |
| R8,R9 | 470R | |
| R10,R12 | 220R | |
| R13,R14,R16-R21,R119,R120 | 22R | Resistor |
| R22,R23,R32-R34,R85,R95,R101,R103,R105,R107,R109,R111,R114,R117,R124,R125,R128-R130 | 10K | Resistor |
| R24 | 100R | Resistor |
| R26-R29 | 5.1K | Resistor |
| R35 | 12K | Resistor |
| R36-R39 | 36K | Resistor |
| R41 | 47K | Resistor |
| R100 | 10R | Resistor |
| R112,R115,R133 | 10K ntc | Resistor |
| R118 | 1M | Resistor |
| R122 | 1.5K | Resistor |
| R126,R132 | 330R | Resistor |
| R127,R131 | 16R | Resistor |
| R135 | 10k | Resistor |
| R137,R138 | 100k | Resistor |
| SPEAKER1 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| SPI1 | spi1 | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| SPI2 | spi2 | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| SPI3 | spi3 | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| SPI4 | spi4 | Generic connectable mounting pin connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| SW1-SW4 | SW_Push | Push button switch, generic, two pins |
| Y1 | 24MHz | Two pin crystal |
| Y2 | 12MHz | Two pin crystal |