MyDesign-KiCad
Mouleeswaran630
Components (22)
| Reference | Value | Description |
|---|---|---|
| U2 | H&T sensor | I2C Humidity and Temperature Sensor, DFN-6 |
| U3 | LDO | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, SOT-223 |
| U4 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U5 | esp | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| C1,C2 | 22uF | Unpolarized capacitor |
| C3-C5 | 100n | Unpolarized capacitor |
| C6 | 10u | Unpolarized capacitor |
| C7 | 1u | Unpolarized capacitor |
| D1 | 1N5817 | 20V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D2 | LED | Light emitting diode |
| D3,D5 | ESD3.3 | ESD protection diode, 3.3Vrwm, SOD-923 |
| F1 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
| FB1 | FerriteBead_Small | Ferrite bead, small symbol |
| J1 | USB_C | USB 2.0-only 16P Type-C Receptacle connector |
| J3 | spi conn | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | uart conn | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2 | 2.2k | Resistor |
| R3,R4 | 5.1k | Resistor |
| R5 | 1k | Resistor |
| R9,R10 | 10k | Resistor |
| SW1 | boot | Single Pole Single Throw (SPST) switch |
| SW2 | reset | Single Pole Single Throw (SPST) switch |