RubyLink
Misaka0x2730
Hardware platform for Miyako-Link based on RP2040
Components (81)
| Reference | Value | Description |
|---|---|---|
| Q1,Q4,Q6,Q7,Q10 | IRLML2502 | |
| Q2,Q3,Q5,Q8,Q9,Q11 | IRLML6402 | |
| U1 | USBLC6-2SC6 | |
| U2 | W5500 | |
| U3 | RP2040 | |
| U4 | 24AA02-OT | |
| U5,U6 | 74HC595 | |
| U7 | W25Q128JVS | |
| U8-U11,U16-U19 | 74LVC2T45DC | |
| U12,U20 | TL331 | |
| U13,U15 | ISO7340C | |
| U14 | ISO7341C | |
| U21 | TLV62568DBV | |
| U22 | CRE1S0505SC | |
| U23 | LP2985-3.3 | |
| C1,C2 | 4.7n/2kV | |
| C3,C10,C17,C63,C65,C66,C68,C69 | 10u | |
| C4,C7,C9,C67 | 10n | |
| C5,C6 | 6.8nF | |
| C8,C62 | 4.7u | |
| C11-C16,C18,C24,C25,C27-C61 | 100n | |
| C19-C22 | 18p | |
| C23,C26 | 1u | |
| C64 | 6.8p | |
| D1 | SYS | |
| D2,J1 | USB | |
| D3 | ETH | |
| D4,D7 | ERR | |
| D5,D8 | ACT | |
| D6,D9 | SER | |
| FB1 | 120Ohm/100MHz | |
| J2 | ETHERNET | |
| J3 | MCU SWD | |
| J4 | MCU SWD TC | |
| J5 | TARGET1 | |
| J6 | TARGET2 | |
| L1 | 2.2uH | |
| R1,R14 | 1M | |
| R2,R3 | 330 | |
| R4 | 10 1% | |
| R5-R8 | 49.9 1% | |
| R9 | 12.4k 1% | |
| R10-R13 | 33 1% | |
| R15 | 0 | |
| R16,R22 | 1k | |
| R17,R18 | 27 | |
| R19-R21,R23,R27,R31,R38,R40,R48,R53,R55 | 10k | |
| R24-R26,R30,R32,R33,R43-R45 | 1.5k | |
| R28,R29,R39,R46,R47,R54,R56,R57,R61 | 100k | |
| R34-R37,R41,R42,R49-R52,R58,R59 | 33 | |
| R60 | 450k | |
| SW1 | RESET | |
| SW2,TP8 | BOOT | |
| TP1 | LINK_LED | |
| TP2 | ACT_LED | |
| TP3,TP7,TP16,TP25 | GND | |
| TP4 | ETH_PWR | |
| TP5 | RST | |
| TP6 | CORE_VCC | |
| TP9 | LED_SYS | |
| TP10 | LED_USB | |
| TP11 | LED_ETH | |
| TP12 | TARGET1_VREF_PWR_EN | |
| TP13 | TARGET1_VREF_PWR_GATE | |
| TP14 | T1_LED_ERR | |
| TP15 | T1_LED_ACT | |
| TP17 | T1_LED_SER | |
| TP18 | TARGET1_PWR_EN | |
| TP19 | T2_LED_ERR | |
| TP20 | T2_LED_ACT | |
| TP21 | T2_LED_SER | |
| TP22 | TARGET2_ISO_VREF_PWR_EN | |
| TP23 | TARGET2_VREF_PWR_GATE | |
| TP24 | TARGET2_ISO_PWR_EN | |
| TP26 | 5V | |
| TP27 | 3V3 | |
| TP28 | GND_ISO | |
| TP29 | 5V_ISO | |
| TP30 | 3V3_ISO | |
| Y1 | 25MHz | |
| Y2 | 12MHz |