Loading design…
MichalVarsanyi
VoxLink is a high-speed solution that allows interfacing of up to 100 sensors using a single high-speed host device. The communication protocol is agnostic to the sensor board, freeing the user from handling low-level communication. This project is part of my Bachelor's thesis at the Czech Technical University in Prague.
| Reference | Value | Description |
|---|---|---|
| U1 | TPD4E02B04 | |
| U102 | TPS7A20L_3V3 | 300 mA Low Dropout Voltage Regulator, Fixed Output, 1.6..6.0Vin, Low-Noise (7μV RMS), 6.5μA IQ LDO, X2SON-5 |
| U103 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U201 | FT2232HQ | Hi Speed Double Channel USB UART/FIFO, QFN-64 |
| U202 | 93LC56B | |
| C12,C201,C203,C207 | 4u7 | |
| C101 | 2u2 | Unpolarized capacitor |
| C102,C202,C204,C208-C211,C213-C216 | 100n | |
| C103 | 1u | |
| C205,C206 | 10p | |
| D101-D104 | TVS |
| D105 | LED | Light emitting diode |
|---|
| FB201,FB202 | 600R |
|---|
| J101 | IDC Connector | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J102 | PicoBlade | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J103 | USB_C_USB2.0 |
|---|
| R101 | 4x22R |
|---|
| R102,R103,R201 | 22R |
|---|
| R104,R105 | 5k1 |
|---|
| R106 | 1R | Resistor |
|---|
| R107,R207 | 1k | Resistor |
|---|
| R202 | 2k2 | Resistor |
|---|
| R203-R205 | 10k | Resistor |
|---|
| R206 | 12k | Resistor |
|---|
| R208 | 0R | Resistor |
|---|
| R209-R213 | R | Resistor |
|---|
| Y201 | 12MHz |
|---|