STM32XP
MechatronixLab
Development board based on the STM32F411RET6
Components (69)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U1 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U2 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U3 | AP3012 | 500mA, Adjustable Step-Up Voltage Regulator, 1.5MHz Frequency, SOT-23-5 |
| U4 | OLED 128x64 1.3" | |
| U5 | USBLC6-2SC6 | |
| U6 | LM324 | Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14 |
| U7 | ADS1115IDGS | Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10 |
| U8 | STM32F411RETx | STMicroelectronics Arm Cortex-M4 MCU, 512KB flash, 128KB RAM, 100 MHz, 1.7-3.6V, 50 GPIO, LQFP64 |
| BT1 | CR2032 | Single-cell battery |
| C1,C2,C4,C6-C10,C13,C19,C27,C29,C36,C37,C40,C44 | 10uF 25V | Unpolarized capacitor, small symbol |
| C3,C5,C11,C12,C17,C18,C20-C24,C26,C28,C30,C32-C35,C38,C39,C41-C43,C45 | 100nF 50V | Unpolarized capacitor, small symbol |
| C14,C15,C25,C31 | 10pF 50V | Unpolarized capacitor, small symbol |
| C16 | 680nF 16V | Unpolarized capacitor, small symbol |
| D1,D3,D4,D7,D8 | LED | Light emitting diode |
| D2 | STPS1L40-Y | 1A 40V 0.37V |
| D5 | WS2812B | RGB LED with integrated controller |
| D6 | BAT54C | dual schottky barrier diode, common cathode |
| D9 | ESDA6V1-5SC6 | Quintuple bidirectional transil, Suppressor for ESD protection, 6V1 Breakdown, SOT-23-6 |
| D10 | 150505M173300 | WL-SFTW SMT Full-color TOP LED Waterclear |
| FB1-FB3 | 600R | WE-CBF SMT EMI Suppression Ferrite Bead |
| FID1-FID3 | Fiducial | Fiducial Marker |
| H1-H4 | MountingHole | Mounting Hole without connection |
| J1,J6 | Conn_01x20_Socket | Generic connector, single row, 01x20, script generated |
| J2 | Jack-DC | DC Barrel Jack with an internal switch |
| J3 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | USB TYPE C | USB 2.0-only 16P Type-C Receptacle connector |
| J5 | MICRO SD | MICRO SD CARD SOCKET |
| JP1 | 9V | Solder Jumper, 2-pole, open |
| JP2 | VSEL | Solder Jumper, 2-pole, open |
| L1 | 10uH | SEMI SHIELDED POWER INDUCTOR WE WÜRTH ELEKTRONIK WE-LQS |
| L2 | 744232090 | WE-CNSW SMT Common Mode Line Filter |
| L3 | L_Small | Inductor, small symbol |
| LS1 | 78dB 4kHz | BUZZER PIEZO PASSIVE SOUNDER MURATA 4 KHZ |
| R1,R2,R11,R13,R14,R18,R21,R24-R27,R32,R35-R37,R39-R41,R45-R53 | 10K 1% | Resistor, US symbol |
| R3 | 6K2 1% | Resistor, US symbol |
| R4-R7,R16,R17,R19,R20,R38,R42-R44 | 51R 1% | Resistor, US symbol |
| R8-R10,R22,R30,R31,R33,R34 | 1K 1% | Resistor, US symbol |
| R12,R15 | 2.2K 1% | Resistor, US symbol |
| R23,R28 | 5.1K 1% | Resistor, US symbol |
| R29 | 0R | Resistor, US symbol |
| SW1 | RST | |
| SW2 | UP | |
| SW3 | LEFT | |
| SW4 | CENTER | |
| SW5 | RIGHT | |
| SW6 | BUTTON 1 | |
| SW7 | BUTTON 2 | |
| SW8 | DOWN | |
| TP1,TP4,TP13,TP14 | GND | test point |
| TP2 | +5V | test point |
| TP3 | +3.3V | test point |
| TP5 | +9V | test point |
| TP6 | +VSEL | test point |
| TP7 | +VEXT | test point |
| TP8 | +VBUS | test point |
| TP9 | +3VBAT | test point |
| TP10 | +3.3VA | test point |
| TP11 | +5VA | test point |
| TP12 | +VCORE | test point |
| TP15 | PD2 | test point |
| TP16 | PC11 | test point |
| TP17 | PC12 | test point |
| TP18 | PB5 | test point |
| TP19 | PB4 | test point |
| TP20 | PC13 | test point |
| TP21 | PB10 | test point |
| Y1 | 32.768kHz | Two pin crystal |
| Y2 | 12MHz 20Pppm 18pF | Four pin crystal, GND on pins 2 and 4 |