Hardware_CSAT
MatthiasGeorgImhof
Hardware design files for Cubesat PCBs
Components (34)
| Reference | Value | Description |
|---|---|---|
| U4 | STM32L496VGTx | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 320KB RAM, 80 MHz, 1.71-3.6V, 83 GPIO, LQFP100 |
| U11,U12 | LTC4066 | |
| U13,U15 | TPS22995 | |
| U14,U16 | MCP65R46 | |
| U17 | TPS2115ADRBR | 2.8-5.5-V, 84-m?, 1.25-A, power mux with manual, automatic switchover and status output 8-SON -40 to 85 |
| U30,U31 | LM66200DRLR | |
| BT1 | CR2450 | Single-cell battery |
| BT2,BT3 | Battery_Cell | |
| C13-C16,C20,C22,C23,C26,C106,C107 | 10uF | Unpolarized capacitor |
| C17,C18,C21,C24,C25,C54-C59,C112,CN1,CN2 | 100nF | Capacitor Arrays & Networks 0508 X7R 2CAPS,Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C46-C53 | 4.7uF | Unpolarized capacitor |
| D8,D9 | NRVBA210LNT3G | |
| F1,F2 | Polyfuse | |
| FB1 | 120R | Ferrite bead |
| J1-J4 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7,J8 | Conn_01x02 | |
| J10 | 10155435-00011LF | |
| L1-L4 | 1uH | Inductor |
| R1 | 806K | Resistor |
| R2 | 330K | Resistor |
| R4,RN12 | 22R | 2 resistor network, parallel topology,Resistor |
| R12,R15 | 26.7K | Resistor |
| R13,R16,R21,R25,RN14,RN15,RN17 | 10K | 2 resistor network, parallel topology,Resistor |
| R14,R17 | 1M | Resistor |
| R18,R22 | DNP | Resistor |
| R19,R23,RN1-RN8,RN13,RN16 | 100K | 2 resistor network, parallel topology,4 resistor network, parallel topology,Resistor |
| R20,R24 | 280K | Resistor |
| R26 | 330R | Resistor |
| R29,R30 | 5K1 | Resistor |
| R36,R38 | 511K | Resistor |
| R37 | 490K | Resistor |
| RN9,RN10 | 5K6 | 2 resistor network, parallel topology |
| SW1 | EVP-AA602W | SWITCH TACTILE SPST-NO 0.02A 15V |
| TH1,TH2 | Thermistor_NTC |