Loading design…
MatheusCipolotti
Repository dedicated to storing programming on STM32
| Reference | Value | Description |
|---|---|---|
| U1 | 74HC165 | Shift Register, 8-bit, Parallel Load |
| U2 | STM32F030K6Tx | STMicroelectronics Arm Cortex-M0 MCU, 32KB flash, 4KB RAM, 48 MHz, 2.4-3.6V, 25 GPIO, LQFP32 |
| U3 | CH340C | USB serial converter, crystal-less, UART, SOIC-16 |
| U4 | LM1117DT-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U5 | 74HC04 | Hex Inverter |
| U6,U7 | 74LS32 | Quad 2-input OR |
| C1-C9,C12-C15 | 100nF | Unpolarized capacitor |
| C10,C11 |
|---|
| 22pF |
| Unpolarized capacitor |
| D9,D10 | LED | Light emitting diode |
|---|
| D11 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
|---|
| F1 | 004.026.0000039 | Resettable fuse, polymeric positive temperature coefficient |
|---|
| J1 | USB_B | USB Type B connector |
|---|
| J2 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
|---|
| JP1,JP3-JP11 | Jumper_2_Open | Jumper, 2-pole, open |
|---|
| R9,R11 | 1K | Resistor |
|---|
| R10,R12,RN1 | 10K | 8 resistor network, star topology, bussed resistors, split,Resistor |
|---|
| Y1 | 8MHz | Two pin crystal |
|---|