STM32_Codes
MatheusCipolotti
Repository dedicated to storing programming on STM32
Components (19)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F030K6Tx | STMicroelectronics Arm Cortex-M0 MCU, 32KB flash, 4KB RAM, 48 MHz, 2.4-3.6V, 25 GPIO, LQFP32 |
| U2,U3 | LM1117DT-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U4 | CH340C | USB serial converter, crystal-less, UART, SOIC-16 |
| C1 | 10uF | Unpolarized capacitor |
| C2-C5,C9-C13 | 100nF | Unpolarized capacitor |
| C6 | 1uF | Unpolarized capacitor |
| C7,C8 | 22pF | Unpolarized capacitor |
| D1-D4 | SM4001 | 50V 1A General Purpose Rectifier Diode, MELF |
| D5 | LL4148 | 100V 0.15A standard switching diode, MiniMELF |
| D6-D9 | LED | Light emitting diode |
| F1 | 004.026.0000039 | Resettable fuse, polymeric positive temperature coefficient |
| J1 | USB_B | USB Type B connector |
| J2 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J3 | Conn_02x15_Odd_Even | Generic connector, double row, 02x15, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Barrel_Jack_Switch | DC Barrel Jack with an internal switch |
| JP2,JP6,JP7 | Jumper_2_Open | Jumper, 2-pole, open |
| R1,R4-R6 | 1K | Resistor |
| R2,R3 | 10K |