Loading design…
ManhTi3012
Stackable Power Integration & Network Electronics
| Reference | Value | Description |
|---|---|---|
| Q1-Q4 | NTMFS5C628NLT1G | |
| Q7 | VISHAY SI2309CDS-T1-GE3 | P-MOSFET transistor, gate/source/drain |
| Q8 | Q_NMOS_GSD | N-MOSFET transistor, gate/source/drain |
| U1 | ACS724xLCTR-50AB | ±50A Bidirectional Hall-Effect Current Sensor, +5.0V supply, 40mV/A, SOIC-8 |
| U2 | LM74800QDRRRQ1 | |
| U3 | SP3485EN | Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, SOIC-8 |
| U4 | MIC5219-3.3YM5 | 500mA low dropout linear regulator, fixed 3.3V output, SOT-23-5 |
| U5 | STM32G030F6Px | STMicroelectronics Arm Cortex-M0+ MCU, 32KB flash, 8KB RAM, 64 MHz, 2.0-3.6V, 17 GPIO, TSSOP20 |
| C1-C5,C7,C19,C21,C29 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C12,C20,C22 | 100uF | Polarized capacitor |
| C13,C17 | 10uF | Unpolarized capacitor, small symbol |
| C16 | 470pF | Unpolarized capacitor, small symbol |
| D1,D4 | LED | Light emitting diode, small symbol |
| D2 | D_Zener | Zener diode |
| D3 | SS36 | Diode |
| D6 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| J2,J4 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | POWER | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R5,R6,R8,R11,R12,R18,R20 | 1K | Resistor, small symbol |
| R3,R4,R7,R9,R10,R13,R14,R22,R25,R26 | 10K | Resistor, small symbol |
| R19 | 120R | Resistor, small symbol |
| R21 | 47R | Resistor |
| TH1 | Thermistor_NTC | Temperature dependent resistor, negative temperature coefficient |