Speeduino-Daytona
MIsfitMatty
Components (65)
| Reference | Value | Description |
|---|---|---|
| IC1 | Trig Cond Socket | |
| IC2 | LM3940IMP-3.3_NOPB | LM3940IMP-3.3/NOPB, Low Dropout Voltage Regulator, 1A, 3.3 V, 4.5 7.5 Vin, 4-Pin SOT-223 |
| Q1-Q4 | SSM3K357R | |
| U1 | STM32F107V_B-C_Tx | STMicroelectronics Arm Cortex-M3 MCU, 128-256KB flash, 64KB RAM, 72 MHz, 2.0-3.6V, 80 GPIO, LQFP100 |
| U2,U3 | TXB0108PW | 8-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, TSSOP-20 |
| U4 | W25Q16JVSS | 16Mbit / 2MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 (208 mil) |
| U5 | MPX4250 | |
| U6 | SP720 | High Voltage, High Current Darlington Transistor Arrays, SOIC16W/TSSOP16 |
| U7-U10,U12-U15 | VNL5050 | |
| U11 | MCP2551-I-SN | High-Speed CAN Transceiver, 1Mbps, 5V supply, SOIC-8 |
| U16,U17 | IXDN602 | |
| U18 | LM2940S-5.0/NOPB | |
| A1 | Pololu_Breakout_DRV8825 | |
| C1,C2 | 12pF | Unpolarized capacitor |
| C3,C18 | 0.01uF | |
| C4,C21,C23 | 1uF | |
| C5,C6 | 470pf | |
| C7,C9,C12,C14,C16,C19,C20,C22,C36,C37 | 0.1uF | |
| C8,C10,C11,C13,C15,C17 | 0.22uF | |
| C24 | 10µ | Unpolarized capacitor |
| C25-C30 | 100n | Unpolarized capacitor |
| C31 | 10n | Unpolarized capacitor |
| C32,C33 | 1µ | Unpolarized capacitor |
| C34 | C | Unpolarized capacitor |
| C35 | 10uF | |
| C38 | 47uF | |
| C39 | 470pF | Unpolarized capacitor |
| C40 | 33µF | Unpolarized capacitor |
| D1 | SP0503BAHT | TVS Diode Array, 5.5V Standoff, 3 Channels, SOT-143 package |
| D2,D3 | D_Zener | |
| D4-D7,D9,D11,D13,D15 | D | |
| D8,D10,D12,D14,D16-D19 | LED | |
| D20 | D_TVS | |
| D21 | B130-13-F | |
| F1 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
| FB1 | 120R | Ferrite bead |
| J1,J3,J5,J27 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Micro_SD_Card | Micro SD Card Socket |
| J4,J15-J18,J23,J24 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7-J14 | Conn_02x02_Counter_Clockwise | Generic connector, double row, 02x02, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J19-J22 | Conn_01x01 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J25,J26 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | Jumper_3_Bridged12 | |
| JP2,JP3 | PULL-UP | |
| JP4,JP5 | VR-HALL | |
| JP6 | Ignition Voltage | |
| P1 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| R1-R11,R86-R89 | 5k | Resistor |
| R12-R22,R31,R40-R42,R46,R48,R50,R52,R56,R59,R62,R65,R69,R70,R77,R78,R90-R93 | 1k | Resistor |
| R23,R24 | R | Resistor |
| R25,R26,R53,R83-R85 | 10k | Resistor |
| R27,R28 | 5k1 | Resistor |
| R29 | 1M | Resistor |
| R30,R33,R35,R37,R39 | 470R | |
| R32 | 3.9k | |
| R34,R55,R58,R61,R64,R71,R74,R79,R82 | 2.4k | |
| R36,R38 | 2.49k | |
| R43,R44 | 220R | |
| R45,R47,R49,R51,R57,R60,R63,R66-R68,R75,R76 | 100k | |
| R54 | 4k7 | Resistor |
| R72,R73,R80,R81 | 10R | |
| SW1,SW2 | SW_DIP_x01 | 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW3 | SW_SPDT | Switch, single pole double throw |
| Y1 | Crystal_GND23 | Four pin crystal, GND on pins 2 and 3 |