lucam
LucasHT22
I love cameras. why not make my own?
Components (24)
| Reference | Value | Description |
|---|---|---|
| Q1 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U2 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U3 | AP2112K-1.8 | 600mA low dropout linear regulator, with enable pin, 2.5V-6V input voltage range, 1.8V fixed positive output, SOT-23-5 |
| U4 | MIC5504-2.8YM5 | 300mA Low-dropout Voltage Regulator, Vout 2.8V, Vin up to 5.5V, SOT-23 |
| U5 | W25Q128JVS | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| C1,C4,C7 | 1µF | Unpolarized capacitor |
| C2,C5,C8,C10,C14,C_CAM2,C_CAM4 | 10µF | Unpolarized capacitor |
| C3,C6,C9,C11-C13,C15,C_CAM1,C_CAM3 | 100nF | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| F1 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
| J1,J2 | DF40C-100DS-0.4V_51_ | 100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold |
| J3 | Conn_01x22 | Generic connector, single row, 01x22, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Micro_SD_Card_Det1 | Micro SD Card Socket with one card detection pin |
| J6 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R2 | 5.1k | Resistor |
| R3,R4 | 4.7k | Resistor |
| R5,R6 | 47Ω | Resistor |
| R7-R12 | R | Resistor |
| R13 | 10kΩ | Resistor |
| R14,R15 | 330Ω | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |