Module-elec-LilyPad
LouiseLeciak
Components (27)
| Reference | Value | Description |
|---|---|---|
| U1 | ATmega2560-16A | 16MHz, 256kB Flash, 8kB SRAM, 4kB EEPROM, JTAG, TQFP-100 |
| U2-U4 | TXB0104D | 4-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, SOIC-14 |
| U5 | CH340C | USB serial converter, crystal-less, UART, SOIC-16 |
| U6 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1,C2,C5-C15,C17-C19 | 100nF | Unpolarized capacitor |
| C3,C4 | 12pF | Unpolarized capacitor |
| C16 | 10uF | Unpolarized capacitor |
| C20,C21 | 22uF | Unpolarized capacitor |
| D1-D5 | LED | Light emitting diode |
| J1 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x21 | Generic connector, single row, 01x21, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Conn_01x13 | Generic connector, single row, 01x13, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4,J5 | Conn_01x07 | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J7,J8 | Conn_01x01 | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 10kΩ | Resistor |
| R2-R5,R9 | 330Ω | Resistor |
| R6 | 100kΩ | Resistor |
| R7,R8 | 5.1kΩ | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| TP1,TP2 | TestPoint | test point |
| TP3 | Test SD CS | test point |
| TP4 | Test Right Eye CS | test point |
| TP5 | Test Left Eye CS | test point |
| TP6 | Test Main Screen CS | test point |
| TP7 | Test DC | test point |
| Y1 | Crystal_GND24 | Four pin crystal, GND on pins 2 and 4 |