Loading design…
LManuC
Variador de frecuencia para motores de 1/3HP trifásicos de 0-500Hz
| Reference | Value | Description |
|---|---|---|
| Q1,Q3 | BC847 | 0.1A Ic, 45V Vce, NPN Transistor, SOT-23 |
| Q2 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U1 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U2 | ESP32-WROOM-32E-N16 | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U3,U5 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4,U6 | B1205S-2WR2 | 1W DC/DC converter unregulated, 10.8-13.2V input, 5V fixed output voltage, 200mA output, 1.0kVDC isolation, SIP-7 |
| U7 | 4N25 | DC Optocoupler Base Connected, Vce 30V, CTR 20%, Viso 2500V, DIP6 |
|---|
| U9,U11,U17-U22 | PC817 | DC Optocoupler, Vce 35V, CTR 50-300%, DIP-4 |
|---|
| U10 | MCP23017_SO | 16-bit I/O expander, I2C, interrupts, w pull-ups, GPA/B7 output only (https://microchip.my.site.com/s/article/GPA7---GPB7-Cannot-Be-Used-as-Inputs-In-MCP23017), SOIC-28 |
|---|
| BZ1 | Buzzer | Buzzer, polarized |
|---|
| C1-C3,C6-C9,C21,C23,C25 | 100nF | Unpolarized capacitor |
|---|
| C4,C5 | 20pF | Unpolarized capacitor |
|---|
| C10,C17,C20,C22 | 22uF | Polarized capacitor,Polarized capacitor, small symbol |
|---|
| C11,C14 | 12pF | Unpolarized capacitor |
|---|
| C12,C13 | 1nF | Unpolarized capacitor |
|---|
| C15,C18 | 4.7uF | Polarized capacitor, small symbol |
|---|
| C16,C19 | 10uF | Polarized capacitor, small symbol |
|---|
| D1 | BSD5C031V | ESD protection diode, 5.0Vrwm, SOD-923 |
|---|
| D2,D3 | LED_Green | Light emitting diode |
|---|
| D4 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
|---|
| D5,D6 | LED_YELLOW | Light emitting diode |
|---|
| D7 | LED_RED | Light emitting diode |
|---|
| J1 | Micro_PwrBus_B1 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | Screw_Terminal_01x03 | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Screw_Terminal_01x08 | Generic screw terminal, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5,J7 | Inv_Signal1_A1 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | Inverter_MEAS | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | ESP32_Programmer | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J9 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J10 | OLED | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| K1 | RT174012 | Omron G5LE relay, Miniature Single Pole, SPDT, 10A |
|---|
| R1-R6,R22 | 1K | Resistor,Resistor, US symbol |
|---|
| R7,R13,R29,R33,R34 | 680 | Resistor,Resistor, US symbol |
|---|
| R8-R12,R14,R15,R24,R26,R27,R31 | 10K | Resistor,Resistor, US symbol |
|---|
| R16 | 1M | Resistor, US symbol |
|---|
| R17 | 681K | Resistor, US symbol |
|---|
| R18 | 511K | Resistor, US symbol |
|---|
| R19 | 121K | Resistor, US symbol |
|---|
| R20 | 150K | Resistor, US symbol |
|---|
| R21 | 28 | Resistor, US symbol |
|---|
| R23 | 59K | Resistor, US symbol |
|---|
| R25 | 102 | Resistor, US symbol |
|---|
| R28,R30,R36,R38,R40,R42,R44,R46 | 4.7K | Resistor,Resistor, US symbol |
|---|
| R32 | 3.3K | Resistor |
|---|
| R35,R37,R39,R41,R43,R45 | 33.2K | Resistor, US symbol |
|---|
| SW2-SW9 | SW_MEC_5G | MEC 5G single pole normally-open tactile switch |
|---|
| Y1 | Crystal 8MHz | Two pin crystal |
|---|
| Y2 | 32.768KHz | Two pin crystal |
|---|