Loading design…
KevinAR-18
EcoLab Dashboard is a smart laboratory EcoLab desktop application for real-time monitoring and control of laboratory devices within the UGM network.
| Reference | Value | Description |
|---|---|---|
| Q1 | SS8050 | General Purpose NPN Transistor, 1.5A Ic, 25V Vce, SOT-23 |
| Q2 | BTA24 | 4A RMS, 500V Off-State Voltage, Triac, TO-220 |
| U1 | ESP32-C3 | |
| U2 | DS1302+ | Trickle-Charge Timekeeping Chip, 2.0V to 5.5V VCC, 0°C to +70°C, DIP-8 |
| U3 | MOC3021 | |
| BT1 | Battery_Cell | Single-cell battery |
| C1 | 330uF | Polarized capacitor |
| C2 | 470uF | Polarized capacitor |
| C3 | 100nF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| F1 | Fuse | Fuse |
| J1 |
| Input 220V |
| Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | AC Socket Load | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | DC SWITCH | Generic connector, single row, 01x02, script generated |
|---|
| J4 | PZEM Sensor | Generic connector, single row, 01x04, script generated |
|---|
| J5 | RGB LED | Generic connector, single row, 01x04, script generated |
|---|
| L1 | 22uH | Inductor |
|---|
| PS1 | HLK-PM01 | Compact AC/DC board mount power module 3W 5V |
|---|
| R1-R3 | 120 | Resistor |
|---|
| R4-R6 | 10k | Resistor |
|---|
| R7-R9 | 220 | Resistor |
|---|
| R10 | 470 | Resistor |
|---|
| R11 | 100 | Resistor |
|---|
| Y1 | 32.768 | Two pin crystal |
|---|