Loading design…
Kev1n8088
| Reference | Value | Description |
|---|---|---|
| U2 | WE-TVS-82400102 | Low Capacitance TVS Diode Array, 2 Channels, SOT-23-6 |
| U3 | STM32F042C4Tx | STMicroelectronics Arm Cortex-M0 MCU, 16KB flash, 6KB RAM, 48 MHz, 2.0-3.6V, 38 GPIO, LQFP48 |
| U4 | RN4678-V/RM113 | |
| U17 | MCP73831-2-OT | Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in SOT23-5 package |
| U18 | AP131-33 | 3.3V 150mA CMOS LDO with Shutdown and Vref Bypass, SOT-23-5 |
| C1,C24,C43 | 1uF | Unpolarized capacitor |
| C2,C3 | 100nF | Unpolarized capacitor |
| C4 | 10nF | Unpolarized capacitor |
| C20,C21 | 4.7uF | Unpolarized capacitor |
| C44,C47 | 0.1uF | Unpolarized capacitor |
| C45,C46 | 8pF | Unpolarized capacitor |
| D1 | RED | Light emitting diode |
| D2 | BLUE | Light emitting diode |
| D3,D4 | LED | Light emitting diode |
| FB1 | FerriteBead_Small | Ferrite bead, small symbol |
| J1 | SMA_Edgelaunch | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J3,J5 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| R1,R2,R7 | 5.1k | Resistor |
| R3 | 56k | Resistor |
| R4,R5,R11,R13 | 1k | Resistor |
| R6 | 10k | Resistor |
| R9,R10 | 22 | Resistor |
| R37 | 2.49k | Resistor |
| SW1 | SW_Push_SPDT | Momentary Switch, single pole double throw |
| Y2 | ECS-320-8-33Q-JES-TR | Four pin crystal, GND on pins 2 and 4, small symbol |