Inventaire_Intelligent
KeegRoc
Components (45)
| Reference | Value | Description |
|---|---|---|
| Q1 | MMBTA56 | 0.5A Ic, 80V Vce, general purpose PNP |
| U1 | HX711 | 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales |
| U2 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U3 | LDL1117S33R | Positive 1A 35V Linear Regulator, Fixed Output 5V, TO-220 |
| U5 | LM2575-5.0BU | Fixed 5.0V 52kHz Simple 1A Buck Regulator, TO-263 |
| 5V1,GPIO1/ADC1_0,GPIO2/ADC1_1,GPIO3/ADC1_2/JTAG1,GPIO4/ADC1_3,GPIO10,GPIO11/ADC2_0,GPIO12/ADC2_1,GPIO13/ADC2_2,GPIO14/ADC2_3,GPIO15/ADC2_4/U0RTS1,GPIO16/ADC2_5/U0CTS1,GPIO17/U1TXD1,GPIO18/U1RXD1,GPIO21/RTC1,GPIO35-GPIO37,GPIO45,GPIO46/LOG1,GPIO47/SPICLK_P1,GPIO48/SPICLK_N1,TP1_VIN1,TP2_GND1,TP_3.3V1 | TestPoint | test point |
| C1-C5,C8,C11,C16 | 0.1uF | Unpolarized capacitor |
| C6,C7 | 10uF | Unpolarized capacitor |
| C9 | 22uF | Unpolarized capacitor |
| C10,C14 | 1uF | Unpolarized capacitor |
| C13 | 220uF | Polarized capacitor, US symbol |
| C15 | 4.7uF | Unpolarized capacitor |
| C17 | 680uF | Polarized capacitor, US symbol |
| D1 | WS2812B | RGB LED with integrated controller |
| D2,D4-D6,D10-D14 | Diode_SMD:D_SOD-323F | ESD protection diode, 5.0Vrwm, SOD-923 |
| D3 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D7 | LED_SET | Light emitting diode |
| D8 | 1N5824 | 40V 3A Schottky Barrier Rectifier Diode, DO-201AD |
| D9 | SMAJ12A | 5V, 1200W TVS unidirectional diode, DSN1608-2 |
| F1 | Fuse | Fuse |
| J1 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Jumper | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Power jack 9V | DC Barrel Jack with an internal switch |
| J5 | LCD | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9,J10 | Conn_01x10 | Generic connector, single row, 01x10, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JBatt1 | Batt | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | JTAG | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP2 | UART | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP4 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 3.3uH | Inductor |
| L2 | 33uH | Inductor |
| P1 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| R00,R8-R10 | 0 | Resistor, US symbol |
| R1 | 20k | Resistor, US symbol |
| R2 | 8.2k | Resistor, US symbol |
| R3,R4,R15,R16 | 100 | Resistor, US symbol |
| R5 | 4.7k | Resistor, US symbol |
| R6,R7,R13,R17 | 10k | Resistor, US symbol |
| R11 | 5.1k | Resistor |
| R12 | 22 | Resistor, US symbol |
| R14 | 220 | Resistor, US symbol |
| SW2 | SW_SEL | Push button switch, generic, two pins |
| SW3 | On/Off | Single Pole Single Throw (SPST) switch, separate symbol |
| SW4 | SW_OPT | Push button switch, generic, two pins |
| SWBootOption1,SWRESET1 | SW_Push | Push button switch, generic, two pins |