VolumioAmp
Kbij
A Raspberry Pi CM4 Volumio Amplifier combination
Components (60)
| Reference | Value | Description |
|---|---|---|
| Q1 | DMP3013SFV-7 | |
| U1 | LT1761-3.3 | |
| U2 | FSUSB42MUX | |
| U3 | AP64501SP-13 | |
| U4 | CP2615-xx-xM | |
| U5 | PCM5101A | |
| U6,U12 | AP2112K-3.3 | |
| U7 | S25FL064LABMFI010 | |
| U8-U11 | 74LVC1G07SE-7 | |
| U13 | RP2040 | |
| U14 | MA12040PXUMA1 | Multi-level switching technology with 3-level and 5-level modulation | 240W peak output power (18V PVDD, RL = 4?, 10% THD+N level) |
| C1,C2,C7,C8,C12,C15,C17,C23,C30,C31,C35,C37-C39,C47,C53 | 100n | |
| C3,C6 | 10u 35v | |
| C4 | 10n | |
| C5,C25,C26,C29,C32-C34,C36,C40,C41,C46,C48-C52,C54 | 1u | |
| C9,C10 | 2n2 | |
| C11,C20 | 220p | |
| C13 | 1.2nF | |
| C14,C16,C21,C22,C24,C42-C45 | 10u | |
| C18,C19 | 2u2 | |
| C27,C28 | 22p | |
| D1 | MMBZ5242BLT3G | |
| D2 | SP0503BAHT | |
| J1 | 24v Input | |
| J2 | USB4085-GF-A_REVB | USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Through Hole, Right Angle, low cost, 3.46mm profile, 16 pin, horizontal, Top mount |
| J3 | Conn_02x03_Top_Bottom | |
| J4 | Screw_Terminal_01x04 | |
| JP1 | USB-VBUS | |
| JP2 | MCLK | |
| JP3 | LRCLK | |
| JP4 | SCLK | |
| JP5 | FMT | |
| JP6 | D | |
| JP8 | MUTE | |
| JP9 | ENABLE | |
| L1 | SRN6045TA-3R3Y | |
| L2-L5 | 0.5u | |
| R1,R11 | 12K 1% | |
| R2,R10,R14,R26-R37 | 1k5 | |
| R3 | 24k | |
| R4 | 47k | |
| R5 | 10R | |
| R6,R7 | 4k7 | |
| R8 | 20K 1% | |
| R9,R13,R15,R16 | 470R | |
| R12 | 2.2K 1% | |
| R17,R23 | 10k | |
| R18-R21 | 33R | |
| R22 | 1k | |
| TP1,TP17-TP20 | SCL | |
| TP2 | SDA | |
| TP3-TP5,TP8-TP10,TP13-TP16 | TestPoint | |
| TP6 | USB_P | |
| TP7 | USB_N | |
| TP11 | L-Out | |
| TP12 | R-Out | |
| TP21 | Reset | |
| TP22 | RP_SCL | |
| TP23 | RP_SDA | |
| Y1 | 12Mhz |