CM5-SODIMM-Carrier
KaiPereira
A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!
Components (19)
| Reference | Value | Description |
|---|---|---|
| Module1,Module2 | 10164227-1004A1RLF | |
| Q2,Q3,Q5 | BSS138 | N-MOSFET transistor, drain/source/gate |
| Q4 | BC817-40 | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1-U3 | SN74LVC8T245 | 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs |
| U4 | RT9742GGJ5 | 3A, Discharge, Active High EN, TSOT-23-5 |
| C1-C6,C10,C14,C15,C17,C19 | 0.1uF | Unpolarized capacitor |
| C7-C9,C12,C13,C16,C18 | 1uF | Unpolarized capacitor |
| C11,C20 | 10uF | Unpolarized capacitor |
| D1 | Green | Light emitting diode |
| D2 | Yellow | Light emitting diode |
| J1 | SODIMM-260_Split | SODIMM 200 Pin socket |
| J2 | Micro_SD_Card_Det2 | Micro SD Card Socket with two card detection pins |
| R1,R15 | 330 | Resistor |
| R2,R5-R13,R16-R21,R24,R25 | 10K | Resistor |
| R3,R4,R22,R23,R26-R61 | 0 | Resistor |
| R14 | 12K | Resistor |
| SW1 | SW_DIP_x04 | 4x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| TP1 | RTC Test | test point |
| TP2 | Sleep Status Output | test point |