PyDash_PCB
JungleGim
The circuit board portion for PyDash
Components (44)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | DMG2307 | |
| U1 | CM4102008 | Raspberry Pi Compute Module 4 with WiFi 2GB RAM 8GB Flash | Raspberry Pi CM4102008 |
| U2 | AP64501SP-13 | Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 5A 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| U3 | BD33FC0FP | 1A, 3.3V LDO regulator with OVP & TSP, without enable, TO-252 |
| U4 | EMIF06-MSD02N16 | 6-Line EMI filter&ESD for SD card uQFN16 STMicroelectronics EMIF06-MSD02N16, EMI Filter & ESD Protector |
| U5,U6 | TPD8S009DSMR | 8 channel 0.8-pF, 5.5-V, ±8-kV ESD protection diode for HDMI & Displayport |
| U7 | TPD2EUSB30 | |
| U8 | MCP2515-xST | |
| U9 | SN65HVD234 | |
| C1,C6,C19,C20,C26-C31 | 1u | |
| C2,C5,C21,C22 | 10u_25v | |
| C3,C4,C23,C25,C32 | 0u1 | |
| C7 | 1n2 | |
| C8-C17,C24 | 10u | |
| C18 | 100u | |
| C33,C34 | 20p | |
| D1,D6-D8 | red | |
| D2-D5 | 27V | |
| D9 | NUP2105L | |
| H2,H4,H7,He1 | CM4_M2_1.5ET | |
| H8-H23 | Standoff_M2.5_6ET | |
| J1 | Micro_SD_Card_Det1 | Micro SD Card Socket with one card detection pin |
| J2 | FFC2B28-40-G | |
| J3 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J4 | CANbus | |
| J5 | CM4-A | CM4 header connector |
| J6 | CM4-B | CM4 header connector |
| J7 | HDMI_ribbon | 40 pin 0.5mm pitch FFC |
| J8 | HDMI_Display | 40 pin 0.5mm pitch FFC |
| J9-J14 | 12x12 keycap - white | |
| L1 | 3h3 | |
| R1,R12 | 660r | |
| R2 | 10r | |
| R3 | 12k 1% | |
| R4,R7-R9,R13,R14,R17,R18,R21-R23 | 10k | |
| R5 | 20k 1% | |
| R6 | 2k2 1% | |
| R10 | 2k7 | |
| R11 | 1k | |
| R15,R16,R19,R20,R24,R25 | 27k | |
| R26 | 4k7 | |
| SW1 | nBoot | |
| SW2-SW7 | SW_Push | Push button switch, generic, two pins |
| Y1 | 16Mhz |