Loading design…
JoelEB
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.
| Reference | Value | Description |
|---|---|---|
| U1 | MK20DX256VLH7 | |
| U2 | MKL02Z32VFG4 | NXP MKL02Z32VFG4 ARM Cortex M0 16QFN (48MHz) |
| U3 | XC6220B331MR | 1A, Low Drop-out Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| U4 | MCP73831 | Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Tri-State Status Output, in SOT23-5 package |
| U5 | SN74LV1T125DBV | Single Power Supply, Single Buffer Gate with 3-State Output, CMOS Logic Level Shifter Level Shifter, SOT-23-5 |
| U6 | PAM2401 | |
| U7 |
| Single cell, Li-Ion/Li-Po charge management controller, Thermal cut-off |
| U8 | MAX17048 | Fuela Gauge IC for Batteries |
|---|
| U9 | MIC5365-1.8YC5 | 150mA Low-dropout Voltage Regulator, Vout 1.8V, Vin up to 5.5V, SC-70-5 |
|---|
| U10 | SGTL5000XNLA3 | Low Power Stereo Codec with Headphone Amp, QFN-20 |
|---|
| U11 | 23LC1024 |
|---|
| U12 | LM66200 | Dual ideal diode device with automatic switchover |
|---|
| U13 | LM66100DCK | Ideal Diode With Input Polarity Protection 1.5 - 5.5V Input Voltage, 1.5A Output Current, Ron 141 mOhm, SC-70-6 |
|---|
| U14 | TPA2005D1DRBQ1 |
|---|
| C1-C6,C12,C16-C20,C25,C29-C31,C35,C36,C42 | 0.1uF | Unpolarized capacitor |
|---|
| C8 | 4.7uF | Unpolarized capacitor |
|---|
| C9,C13,C41 | 10uF | Unpolarized capacitor |
|---|
| C10,C11,C24,C26-C28,C32-C34 | 2.2uF | Unpolarized capacitor |
|---|
| C14,C15 | 22uF |
|---|
| C21,C23,C37-C40 | 1uF | Unpolarized capacitor |
|---|
| C22 | 0.15uF/150nF | Unpolarized capacitor |
|---|
| D1 | Yellow | Light emitting diode |
|---|
| D2 | Orange | Light emitting diode |
|---|
| D3 | Red | Light emitting diode |
|---|
| D4,D5 | Green | Light emitting diode |
|---|
| F1 | 6V/0.5A/1A | Resettable fuse |
|---|
| J1,J6,J13,J17,J18 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2,J10-J12 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | JST_2mm_LiPo | 2 Pin 2mm JST Battery Connector |
|---|
| J4 | 3.5mm TRS | Audio Jack, 3 Poles (Stereo / TRS) |
|---|
| J5 | USB_C_Receptacle | USB 2.0-only Type-C Receptacle connector |
|---|
| J7 | microSD | Micro SD socket External Pin |
|---|
| J8 | Qwiic_Vertical | 4 pin JST 1mm polarized connector for I2C |
|---|
| J9 | Conn_01x12 | Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J14-J16 | ACJS-HHOP |
|---|
| J19 | Barrel_2.0mmPin_PJ064 | Barrel Jack, 2.0mm diameter center pin, Vertical, PC-pins |
|---|
| L1,L2,L4-L10 | Ferrite | Inductor with ferrite core |
|---|
| L3 | 2.2UH |
|---|
| R1,R2 | 33 | Resistor |
|---|
| R3 | 470 | Resistor |
|---|
| R4,R5 | 5.1k | Resistor |
|---|
| R6,R15,R16,R18-R21,R26,R27,R29,R31,R32 | 10k | Resistor |
|---|
| R7 | 750k |
|---|
| R8 | 100k |
|---|
| R9,R10,R23-R25 | 4.7k | Resistor |
|---|
| R11,R12,R14 | 2.2k | Resistor |
|---|
| R13 | 100 | Resistor |
|---|
| R17 | 1M | Resistor |
|---|
| R22 | 330 | Resistor |
|---|
| R28,R30 | 150k | Resistor |
|---|
| RV1-RV6 | R_Potentiometer_US | Potentiometer, US symbol |
|---|
| ST1-ST6 | Standoff | Drill holes for mechanically mounting via screws, standoffs, etc. |
|---|
| SW1-SW5 | SMD_5.2x5.2mm_h1.9mm | Single Pole Single Throw (SPST) switch |
|---|
| SW6 | SW_SPST | Single Pole Single Throw (SPST) switch |
|---|
| SW7 | SW_SPDT | Switch, single pole double throw |
|---|
| Y1 | ABM8G-16.000MHZ-18-D2Y-T |
|---|