Split-Flap
Ir0nC0wb0y
Components (23)
| Reference | Value | Description |
|---|---|---|
| U1 | TPL7407LDR | |
| U2 | LD1117S50TR_SOT223 | 800mA Fixed Low Drop Positive Voltage Regulator, Fixed Output 5.0V, SOT-223 |
| U3,U5 | LM66100DCKR | |
| U6 | ATmega328PB-A | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, TQFP-32 |
| C1,C6,C7 | 10uF | Unpolarized capacitor |
| C2,C3 | 18pF | Unpolarized capacitor |
| C4 | .1uF | Unpolarized capacitor |
| C5 | 0.1uF | Unpolarized capacitor |
| D5 | 1N4007 | 1000V 1A General Purpose Rectifier Diode, DO-41 |
| J1 | ICSP | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | FTDI | Generic connector, single row, 01x06, script generated |
| J3 | MOTOR | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | DATA_IN | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | DATA_OUT | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | ENDSTOP | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 500R | Resistor |
| R2 | 1k | Resistor |
| R3-R6 | 2.5K | Resistor |
| R7,R8 | 10k | Resistor |
| R9 | 15k | Resistor |
| SW1 | ADDR SELECTOR | 5x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW2 | SW_Push | Push button switch, generic, two pins |
| Y2 | 16 MHz | Two pin crystal |