IPRL-Electronics-Hardware
ICRS
Components (19)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | S8550 | 0.7A Ic, 20V Vce, Low Voltage High Current PNP Transistor, TO-92 |
| U4,U6,U7 | HX711 | 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales |
| A1 | Pololu_Breakout_DRV8825 | Pololu Breakout Board, Stepper Driver DRV8825 |
| C1 | 100uF | Unpolarized capacitor |
| C6,C28,C38 | 0.1u | Unpolarized capacitor |
| C7,C17,C19,C20,C23-C25,C27,C35,C37 | 10uF | Unpolarized capacitor |
| C8-C11 | 10n | Unpolarized capacitor |
| C16,C26,C36 | 0.1uF | Unpolarized capacitor |
| ENC1,ENC2,LC1-LC3,Stepper1 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J1,J10 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| LS1 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| Motor1 | Conn_02x03_Top_Bottom | Generic connector, double row, 02x03, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R5,R6,R26,R27 | 10k | Resistor |
| R7,R9,R11,R13 | 1K7 | Resistor |
| R8,R10,R12,R14 | 3K3 | Resistor |
| R16,R17,R20,R21,R28,R29 | 100 | Resistor |
| R18,R23,R31 | 470 | Resistor |
| R19,R22,R30 | 220 | Resistor |
| Servo1 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |