ESP32-Motor-RS232
Henriquepr15
Projeto de hardware com ESP32, RS232 e controle de motor
Components (35)
| Reference | Value | Description |
|---|---|---|
| Q3 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U5 | LM2596S-ADJ | Adjustable 3A Step-Down Voltage Regulator, TO-263 |
| U6 | MAX3232 | 3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors |
| U7 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U8 | ESP32-WROOM-32 | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| C5 | 100µF | Unpolarized capacitor |
| C6 | 1µF | Unpolarized capacitor |
| C7,C12,C28 | 100nF | Unpolarized capacitor |
| C8 | 10 µF | Unpolarized capacitor |
| C10 | 220 µF | Unpolarized capacitor |
| C11,C29-C32 | 100 nF | Unpolarized capacitor |
| C13 | C | Unpolarized capacitor |
| C17,C25,C26 | 10u | Unpolarized capacitor, small symbol |
| C33,C34 | 100uF | Unpolarized capacitor |
| C35,C36 | 1nF | Unpolarized capacitor |
| D1,D9 | D_TVS | Bidirectional transient-voltage-suppression diode |
| D2,D7,D10 | D_Schottky | Schottky diode |
| D8 | D_Zener | Zener diode |
| D11,D12 | LED | Light emitting diode |
| F1 | Fuse | Fuse |
| FB1 | FerriteBead | Ferrite bead |
| J1,J3,J5 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | DE9_Pins | 9-pin D-SUB connector, pins (male) |
| J6 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | L | Inductor |
| R8 | 3,65 kΩ | Resistor |
| R9 | 1,20 kΩ | Resistor |
| R10 | 100kΩ | Resistor |
| R11 | 33kΩ | Resistor |
| R13 | 1kΩ | Resistor |
| R14,R26 | 100 kΩ | Resistor |
| R27,R28 | 10kΩ | Resistor |
| R29,R30 | 330Ω | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| TP1-TP5 | TestPoint | test point |