Loading design…
HecVelaz
| Reference | Value | Description |
|---|---|---|
| U1,U5 | SP3485EN | Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, SOIC-8 |
| U2 | ESP32-S3-WROOM-1 | 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | DS3231M | Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16 |
| BT1 | SMTU2032-LF | |
| C1,C8 | 0.1u | Unpolarized capacitor |
| C2,C9 | 10u | Unpolarized capacitor |
| C3,C6,C7,C12-C14 | 0.1uF | Unpolarized capacitor |
| C4 | 10uF | Unpolarized capacitor |
| C5,C10 | 22uF | Unpolarized capacitor |
| C11 | 1uF | Unpolarized capacitor |
| D1,D5 | SM712_SOT23 | 7V/12V, 600W Asymmetrical TVS Diode Array, SOT-23 |
| D2 | GREEN | Light emitting diode |
| D3 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
|---|
| D6 | BLUE | Light emitting diode |
|---|
| D7 | RED | Light emitting diode |
|---|
| D8 | SS14 | 40V 1A Schottky Diode, SMA |
|---|
| J1 | Micro_SD_Card_Det1 | Micro SD Card Socket with one card detection pin |
|---|
| J2,J4 | CON-SOCJ-2155 |
|---|
| J3,J8 | Screw_Terminal_01x04 | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
|---|
| J7 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
|---|
| J9 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| R1,R2,R17-R20,R22-R24 | 4.7k | Resistor |
|---|
| R3,R25 | 120 | Resistor |
|---|
| R4-R10,R12 | 10k | Resistor |
|---|
| R11,R26,R27 | 1k | Resistor |
|---|
| R15,R16 | 5.1k | Resistor |
|---|
| SW1 | RST | Push button switch, generic, two pins |
|---|
| SW2 | BOOT | Push button switch, generic, two pins |
|---|