USB-PD-Power-Supply
Harshavar8jdm
Components (14)
| Reference | Value | Description |
|---|---|---|
| IC1 | MC14051BDR2G | Low-noise - 12 nV/sqrt.Cycle, f <= 1.0 kHz Typical; For 4PDT Switch, See MC14551B; Switch Function is Break Before Make; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Analog Voltage Range (VDD - VEE) = 3.0 to 18 V Note: VEE must be <= VSS; Triple Diode Protection on Control Inputs; For Lower RON, Use the HC4051, HC4052, or HC4053 High-Speed CMOS Devices; Linearized Transfer Characteristics; Pin-for-Pin Replacement for CD4051, CD4052, and CD4053; Pb-Free Packages are Available* |
| Q1 | 2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U1 | SW-SMD_DSHP03TS-S | |
| U2 | CH224A | 100W USB Type-C PD3.0/2.0, BC1.2 Sink Controller, SSOP-10 |
| U3 | TPS70933DBVR | 150-mA, 30-V, ultra-low-IQ, low-dropout voltage regulator with reverse current protection and enable |
| C1,C2,C4-C9 | 100nF | Unpolarized capacitor |
| C3 | 1uF/50V | Unpolarized capacitor |
| D1,D4-D8 | LED | Light emitting diode |
| D2,D3 | TVS | ESD Suppressors / TVS Diodes SMP Diode 0402 5vdc 2.5 pf <12v clamp@1a |
| J1 | Screw_Terminal_01x02 | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J3 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| R1,R6-R11 | 1K | Resistor |
| R2-R5 | 10K | Resistor |